Search results

Nice work, my flamer was too faded to get away with removing the badges sadly

Just three little gt ones on the foglight surrounds

Just looking to replace the standard stickers

Cheers mate!

Can anyone link me to the guy or anyone who can make stickers?

I love a Valver, but I hate a valver sunroof! They'd let less water through if you left them open!

Yeah they were just down the road from me in Leominster, I think they have a sticker making company now

A second coat and 24 hours drying did the trick

That's why, they normally have a nut like the one in the lower photo

Brakes I'd use @George@RTR_Parts

Looks pretty corroded , most of it you'll probably be replacing like discs, shocks and springs I'd imagine

No on the stub of the drive shaft

Theres a lot of thread showing on that drive shaft! Has your car been parked up for quite some time?

I used stainless button head bolts and unlock nuts for this very reason

So those torx bolts...how did that pan out?😉

Agreed, black also makes tyres look dirty and grey unless you keep on top of the tyre dressing

I dont think they left Dieppe this tidy Steve!

@Amos91 solved it! I thought theres nothing to lose in pulling one of these pumps apart, so pulled the cover from the end with the inlet and outlets on. You know the well known fix for the valve, well it would appear that a similar issue is what causes the pumps to fail. The impeller sits over...

I'll have a look in a bit

Progress maybe?

With the headlights on the headlight washers arent running either?

Ah sorry it's the drivers headlight motor that is whirring when operating the washers. With someone operating the washers I can hear the pumps click but no water or at least only very occasionally and only for a few seconds. I think I'll strip it out and try the pumps in a bowl of water

Got a bit of a strange one with my screen washers, they are only working once every one and then and when not squirting I can hear the drivers side headlight motor run when the jets should be. I've stripped it all down, cleaned and trimmed the pump rubbers back but no change

Or if you can get hold of one a 1.2 8v heatshield is a tidy solution

Yep that's a right bodge, get an ad up in the wanted section someone on here will help you out. @Mbeau is/was breaking a 182 recently

Painted my rear calipers silver to match the fronts I did a few weeks back, bled them all again to try and get the slight spongey feel gone but I've still got a bit of travel before they bite which is annoying. Discovered when I stripped the scuttle down to seal the leaking heater box I've...

The centre cap looks a far worse colour match in that photo than real life

That's now two out of four of my refurbed wheels to go into crazed cracks, not amused as I've already had one redone because it was a bad job