ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Search results

  1. J

    Leaky Sunroof-both sides of the car?

    The seal needs to be re-sealed, bad time for it to happen, but all clio's with sunroof suffer from this. You could try and unblock the channels though,as maybe the water is building up and stays in the sunroof area
  2. J

    This Clutch Any Good?

    If you look on website's like k-tec etc they are more expensive, but if you contact Manyard on here he is able to sell them , or go to eurocarparts.co.uk/com
  3. J

    This Clutch Any Good?

    ^ yep, Valeo are the original part for Renault, no point buying a cheap clutch as it wont be any good compared to valeo
  4. J

    Which CV Boot?

    Cant you just use the one allready on the shaft curley ?
  5. J

    Internet bods - Please help :(

    Who is your ISP with Luke ?
  6. J

    Harsh vibration under heavy exceleration

    Ahh, ye try and tighten that more, should be rock solid, or it could be that that mount is worn,
  7. J

    Harsh vibration under heavy exceleration

    JMS ;) If its the dogbone, just replace the bushes with powerflex bushes, they tend to last much longer,
  8. J

    Mk1 F4R/172'd Track Car Project [Year 3 - Engine and Chassis Rebuild]

    Re: Mk1 F4R'd Track Car Project [2010 Winter Rebuild] Jord is there any chance you could show how this mount bolts to the box? I have tried doing a test fit, but the mount never reaches the subframe :S Cheers bud
  9. J

    307 Splitter Fitting...Any Tips/Advice??

    Just use some self tappers fella, those will hold it in place fine :)
  10. J

    Quick Question on removing Lower Inlet??

    Not 100% sure but i dont think you meed to jack the engine last time i checked, you remove the front bolts and then one on the left hand side which goes in sideways. The one on the side is long so might be a tricky to remove if you have A/c
  11. J

    My 172/182 induction parts

    Ye no problem, i have money waiting :)
  12. J

    My 172/182 induction parts

    Sorry for the airbox :o
  13. J

    "Oops" gearbox went bang

    Reverse gear selector gone kaput?
  14. J

    My 172/182 induction parts

    Il give you £25 + postage for it, like now ?
  15. J

    V5.. DVLA.. HELP

    Ye you need the Whole engine number Scotty, i still need to do mine, just cba going down to renault to get them to write a report, does it take 3 months for DVla to sent it back?
  16. J

    Engine Swap Help Needed!

    Ye straight fit in, maybe you will need different mount not 100% sure, But as to the 1.2 running gear you might get away using them, as the 1.2 running gear works fine with a 2.0 drop in, you will need to change ecu/uch/keys/door locks/petrol cap/ignition barrel/decoder ring so it all works
  17. J

    iOS "must have" apps

    Re: iPhone "must have" apps? it doesnt use alot dude, mine used on 1 night with 772 disruptions was 190892k so 190mb ..
  18. J

    iOS "must have" apps

    Re: iPhone "must have" apps? Just leave it as standard, and just record over night :)
  19. J

    Cast iron lump under engine mount?

    Ye just remove it, its nothing important :)
  20. J

    iOS "must have" apps

    Re: iPhone "must have" apps? Doodle ship is a decent game also free aswell, its abit like battle ship
  21. J

    iOS "must have" apps

    Re: iPhone "must have" apps? Doodle Kart doesn't work anymore, iv deleted it and re-downloaded yet it wont work, i go to race and it goes back to the iphone home screen :S
  22. J

    Anyone help the colour of my car?

    Iceburg or titanium
  23. J

    What driveshaft on a 1.2??

    Thats the only way fella, but if you can find out in the morning, order it straight away then next day fit the replacement, By the looks of it you can tell which one you need from the pic, go under the car and look if theres a gaitor, if there is then i take it that its the 3roller one you...
  24. J

    What driveshaft on a 1.2??

    The 2nd one is for a 16v im 100% sure as mine has the exact 3 roller type and a gaitor on the end. . I would say the first one is the one you need, but have you checked the one you need to remove first?
  25. J

    Hey, New

    Welcome :)
  26. J

    172 Cup Master cylinder Ports, How many??

    Ye, im not sure if it will fit a standard one tbh, but to be on the safe side i got that too, as im removing abs aswell, just not sure how MOT will test it though,
  27. J

    172 Cup Master cylinder Ports, How many??

    yup as what jord said, I will be coming back to NW next 2weeks jord, so this might be a little challenge for you ;) steve did say its easier with engine out lol
  28. J

    172 Cup Master cylinder Ports, How many??

    iirc its 4, but i can go double check if you want, as i have one ready to be fitted soon,
Top