Search results

as above

Burb is your brake set-up like this? The pink dildo is the bias valve, master cylinder is black. cheers

like the bump strips :D

Sweet, cheers for the info.

most only activate once the pedal hits the floor

£50! I dont think you could use it solid for 5mins lol. Will explode! Just use it for short blasts etc

about 5 mins lol

it depends on the setup, but between 25 and 100 iirc (jet dependent)

I think his jets are 50s its a wet kit btw

LOL heard that on radio one today!

Just been offered a Kit same as this http://www.noswizard.com/product_desc.php?id=59 For CHEAP. Any problems with this on ITBs and high comp? I presume i would need a progressive controller? I know this shizzle is chav, but it would be a nice boost and the kit is cheap!

Bought - BOUGHT! lol

dude, if you want a clutch PM i can get you a Group N helix (same as Yoz one) clutch for £268 inc VAt

kk, thats cheap! Not worth getting a PTFE one!

172 psh1 cheers

EDIT! Ive saved the water temp as I think ive found the wire to the dash on the firewall connection :D Just need to find which is Oil pressure switch and oil level

sweet, i have a diagram for the firewall connector so can trace it. cheers

sweeeeet! skilz

these seem cheap http://www.merlinmotorsport.co.uk/INSTRUMENTS-/-GAUGES-STACK-INSTRUMENTATION-Stack-Electric-Gauges/c1_3286_3291/index.html

Ive got the speedo worked out I think, but just this bridge to cross!

Yeah i know the omex has no CANBus but i think the renault ecu gives the signal from CANBus. But if i could pull the dash cluster apart and drive it direct off the omex than that fixes my problem lol. But is that possible? cheers

Could I get it to work with the omex? It has a output on the new loom for the tacho but is the signal through CanBus? I.e would it need coding to run the sagem tacho?

I need the following for my build. Oil Pressure Oil Temp Water Temp And maybe the tacho if I cant get the renault one to work off the omex 600. Want to keep costs down but also don't want any cheesey f**king raceX s**t. Whats the advantages with electric/mechanical and how would i...

:(

matty, how much to drive down and wire my new loom in? :cool:

sweet, can i just spit a iginition live that is near to the sensor and run it off that

yeah or could be for the fan? Thoughts on grounding?

Sweet. Why does it go into the ecu too? I could just meet the wire up at the firewall conection block. I know which pin is speed (white wire) Does it need grounding!?

sweet, so just direct then?

take the oil filer cap off, get someone to crank it, if the cams spin the belt hasnt snapped. Sounds like a alarm/imob issue?