Search results

Eddie have you tried the Prima Hydro that Alex does sounds the same as the Duragloss Aquawax, very good finish also. Wondered if there was much difference if you had tried it?

Non-bio if you use washing powder, but I'm now using the Microfibre wash from CG and they come out much better than with the powder I think.

What router is it?

Speaking to my brother the other day about colour coding this bit and he said he's seen it done on some Corsa (what he's got) and it didn't look that good and was better being standard.

This is a bit cheaper - http://www.incarexpress.co.uk/view_product.php?partno=KDCW6537U

It's different by the looks of it.

Looks ace that...really nice!

IMO I think you would be better off leaving it.

Yes, happened once with a crap picture thing saying it was doing some scan or something.

Only thing I change if it can't be assigned otherwise it the channel that the wireless if using to something else as other things can interfere with the signals. You need to change this on the router if your going to do it.

Have you seen the free delivery thread, that should make it cheaper.

That's not the option for acquiring an IP address from a router using DHCP. That's for when he's connected, to the router and it's not letting him on yet.

Looks nice mate, very tidy :)

Like Eddie says I hope you've ordered lots of other bits at the same time as most of it is about half price. Did you get the pads as well as you will need something like the Sonus SFX pads. The Poorboys SSR range is supposed to be good to get the hang of it first off with quite good...

Are you using encryption on the router? If you have, have you typed the pass key to access your router?

Look for a function key (usually bottom left) and a 'F' key at the top of your keyboard to enable your wireless if it's on-board.

What clay bar are you using? I found the Sonus Green fell apart in my hands and that was using proper lube as well.

Sounds very similar to what we had to go through. I'll send you our id.

No, best to do it in the shade. EGP would be a nightmare to get off as well.

Well we constantly insisted that they were wrong even though they didn't ever admit it. BT came to the house to check everything was running correctly as we have a few lines etc. Pipex said we would have to pay if there wasn't a problem, but there was a problem which was obvious as like you we...

Here you go mate - http://www.cleanandshiny.co.uk/ProductDetails.asp?ProductID=9100

Same thing happened to us, took us about 3 weeks to get it sorted and we have it on 8Mb and it's quite good speeds usually now. Most of the problems were Pipex I think in the end but obviously the didn't admit that.

Pete you might find this thread on DW helpful for your cable, you still have the original cable intact as well and it works great. If you need any help with it Nige is really helpful, gave him some money and he got all the cabling sorted for me.

It probably needed PC'ing after it came from the dealers.

Meguiars are going to at some point I think.

Cheers Rich. If you can get spot free results on the black then it's got to be worth it, especially if it lasts that long.

How do you know which one you need Rich, being either the 0ppm or the 30ppm? Is the 0ppm the better one of the two if the water isn't too hard?

No polish in the SP kit so it won't replace anything.

Like you say Eddie tempted myself, do you wash the car as normal and then rinse down with the filter attached?

Waffle Weave drying towel to dry and spray with some QD to make it easier. Tried a few and I'd say that this or this have been the best so far. You could do the CD test on the towel to make sure that it won't scratch the paintwork. Do this by running the towel over the CD and if it marks...