Search results

Wedge the brake pedal all the way down, quite hard to do as you need something the perfect length.

1.11’s, 3000’s, Pagid Blue/Grey or Mintex 1177 in the front.

Just booked mine.

BRAKE CALIPER REPAIR KIT (BRK203020) That's the rear kit part number.

That's a kit for the 197/200 calipers @JB21

Do you feel like you're in the Matrix and everything you've been told is a lie 😂

Yeah they do pull about a third of the cars braking efficiency. The mk2 cup racers ran ds1.11 with 2500 in the rear, so it must have worked for them.

Quote seems fair, I guessed around £250 for the paint then plus whatever for the dent to be pulled out. Less filler the better.

£3-3.5k

Is that engine power or bhp per ton? Bhp per ton would give a better idea of which will be quicker in a straight line i would have thought.

That'll pull out no bother. Will need paint though possibly.

@bloke may know. He does all the 197 cams that get mapped at EFI. I was under the impression that 438's are timed to oem timing...

Quite possibly mate, the whole interior is held on with the f*****s 😂

Pretty much this. They're on those pop clip things mostly i think from memory.

Rust! Inside of the sills, but you need the rear inside door cards/trim off to see properly. Apart from that they're not that different from the 182. Some have issues with the idle control valve with it being cable throttle.

Tight is tight.

Go with the instructions mate.

Might actually be 140nm for both on the fronts.

Can't actually remember but it's tight enough.

https://www.cliosport.net/threads/172-182-torque-wrench-settings.687911/

105nm or FT.

Make sure they're the 14mm bolts, as powerflex do a 12mm too and they get sent out in error sometimes. Just make sure you torque the bolts properly to their spec. I think the camber bolts are 140nm and the normal lower bolt will be 180nm.

Always old Civc Coupes or Accords 😂

129 then yeah with speedo drive.

089 if it’s a ph1.

Good effort that!

Just looking back now at the cage, how the f**k did you get it in with it all welded together 😂 Must have been a right puzzle?

The only tensioner on the aux belt is the spring one you put the jubilee clip round to compress.

Should be fine, but the Renault belt is only £4 more :wink: