Search results

202bhp

Just get the front wrapped in paint shield film.

:tongueclosed:

Not the rear beam bolts. The ones holding the seats in go all the way through, it's those which he wants to spray.

He means the bolts go through the body and are exposed to the elements underneath the car, so he wanted to spray with WD first. Not really needed though, if they're tight just stick the 17mm socket on a breaker bar.

Looks very similar to a Milltek. It should have a logo tag welded on somewhere if it is.

Bullshit

Maybe he's blew the welds on the intake...

Doesn't sound like fuel surge with the hazards flashing. What about the earth strap near the gearbox, is that on it's way out?

Was gonna say, speak to @bloke

If you're lucky and it's not smashed the head completely you could rebuild it and maybe chuck some better valves in while you're there.

Have you still got the pops and bangs map on this Jamie, or did you switch back to the 98ron map now?

Fucked.

#00 grade wire wool and autosol.

Rear alignment is adjustable that easily. Need shims to change camber/toe.

105nm

Check the lower strut bolts are tight too, any play at the bottom will travel through to the top mounts.

Should be good this. P.S. Still need to send you them injectors :neutral:

Just keep topping it up until it comes out of the filler hole. (not the breather hole on top of the box) Need the car level ideally.

I have the Pure Motorsport 5mm ones. No problems at all for me.

There's a glass cover number to call on your Greenlight policy documents. It goes through to Autoglass. I had mine done last year.

AD08r tyres, CL RC5+ pads and H&R coilovers. You'll be fine with standard suspension for a while.

Can't get caught, Golf R's do 180mph bruv.

Red and blue lights, silver golf... looks like an unmarked police car :tongueout: Imagine the fun you could have.

Nice mate. Got them lights in the front grille yet :wink:

Use the strongest cutting polish and pad and make sure you prime it properly. An X of polish on the pad and then rubbed in by hand will be enough to prime it. Work it on speed 5-6 until it goes clear. That should get rid of most of the deeper marks. Depending on how deep they are you might not...

I'm not sure the AF range. What is their strongest cutting polish? You may need another polish instead like one of the Menzerna range.

Yeah, he'll be testing them probably (he's their test driver). Most of the fast cars usually respect the normal road cars, just don't hold them up for ages otherwise some get arsey. He's sound though. Tbh you could be flat out and just move off line slightly and they'll be on their way, you...

More AF pads or Chemical Guys Hexlogic pads.

Oh haha 😂 They won't be able to go that quick if there's traffic. Go speak to Oli too, he'll give you a few tips. Nice guy.