Search results

With the £2.50 off voucher - it was about £2 for a burger and a plate FULL of amazing chips. I've had office canteen food that was worse and double the price

In typical Cliosport form - lots of bickering and differing opinions LOL Let me reply as someone who has done what you want. Firstly get the "I need 200bhp" out of your head - what does it matter if you get 190 or 196 or 200 - if it's faster and the power is mid-range, useable and makes the...

Have any of you lot actually been to another car show and paid £8 for a hotdog you could use as an emergency window-smasher if you rolled your car into a lake?

Yeah I've eaten a LOT worse at shows - I'll agree it was a bit dry from being kept warm, but then if the'd cooked everything fresh everyone would winge that it took 5minutes to turn up LOL I was just gobsmacked that we both ate and I got some water for less than £15 lol

I haven't read the whole thread but I've read a load of food winging and got to this and felt the need to reply WHUT?? With our £2.50 off vouchers me and Leah ordered a plate of chips, a bottle of water, and a burger and chips. It came to about £5 which is the cheapest food I've had at a car...

Is the grey one a clio 197/200? I think the guy works at mcdonalds as it was there on saturday too :)

Loved the lashes - suited you well! ;)

Thanks to everyone who worked hard putting this together Absolutely fantastic day The entertainment was awesome, the food was cheap and really nice, got free entry to the motor museum. The quality of cars there blew me away - so many nice looking cars Really brilliant show - I actually...

Challenge accepted ;)

Also there is a set of Eibachs (I think the proline ones) that doesn't actually lower the car - so if you want to firm the ride up and stop it rolling a bit - go for them I did the nurburgring in mine with Eibach sportlines and a whiteline ARB - it was awesome! :D

Yeah the semi assembled loom - but mine was assembled by the previous owner of the bodies who made a complete **** up of it - so going to make a new one over winter

Rear ARB really reduces the low speed understeer I had one fitted to mine when it was on standard shocks and eibach springs - made a massive difference. The car was a lot more fun Get it done :)

I'm pretty sure if you can get to mcdonalds then someone will let you jump in I'd offer but I've only got 2 seats and the girlfriend is coming lol

Yep - cut all that out, and the injector loom, coilpack, etc... pretty much everything was cut out back to the main trunk of the loom

I agree with chip - there is no "first step" or "cheap" performance mod for clios Most induction kits lose power, decats do feck all. A remap will get you a few more bhp - but then every other mod you do you'll have to remap it It costs £3k+ to get an extra 20bhp out of these cars. Just get...

A foot long bar on a T40 bit? I always find that just rounds the bit off as you can't really apply enough pressure to hold it in the screw Impact drive that I posted - every single time. Hammering the thing stops it slipping and rounding the bit off and shocks locktite off if the previous...

Race Tech Dash is what I'm going for this winter - then I can bin the standard ecu and the last of the renault wiring :) The thermostat housing is plenty thick enough to be drilled and tapped for a standard omex water temp sensor mate, Mines been in there all year and it's had some serious...

Don't know about the coolant sensor mate - I got a drilled and tapped thermostat housing with my kit so am using that. As for wiring loom - I used the one that came with it, which I believe K-Tec made. It's awful. The injector part of the loom is about 2 foot too long and some other parts are...

Without sounding like a dick - Neither The RS Tuner gives you a higher rev limit and the feeling of a BIT more poke - but not worth the money The 182 manifold and decat is an absolute pain to fit and just makes the car noisier The K-Tec induction kit they've just released that puts a...

I'd heavily recommend the manfrotto super clamp mate http://www.ebay.co.uk/itm/Manfrotto-Super-Clamp-with-Stud-and-Tripod-Head-/400195289807?pt=UK_Tripods_Monopods&hash=item5d2d7f82cf Those are SOOOO sturdy - you could mount a massive dslr on one if you wanted! I use that same clamp in...

Found some pics online Looks to me like the red wire goes in the top pin and the white wire goes in the bottom next to the black wire Fingers crossed that's right :D I'll put a bit of solder on them and try hooking it up - see what happens

Hahah nice tan! Glad to see the gopro with a good home - look forward to seeing some footage Looking forward to seeing the storm wiper kit fitted too - I've been thinking about one for mine for AGES but not seen anyone running one yet

Re: Boosted BlackGold Project - F4rT content. Sorry to hear about your shoulder mate - hope you get the build finished pre-op :) The workmanship on that cage looks good - shame the harness bars are so far down though?

Yeah the locating pins are fine - i've pursueded them out a bit to were they need to be I'll put a bit of solder on tomorrow to secure the wires - just need to work out which way round they need to go now LOL

Ahhh that makes sense then haha I've managed to get the 2 metal pins out the connector block now by pushing staples either side of them and then pulling I don't think I'll be able to recrimp the pins because they're tiny So my plan now is either to find a couple of the little pins and a...

Oh by the way I've seen these 14-pin connectors on some of the connects2 stuff - so if it's an option to buy another connector and solder the wiring together that might work too

I've got this little Alpine box that allows me to control the stereo through the Clio stalk controls - but also shows the current track on the dash display As the stereo in my car is in the glovebox this was really handy However a month ago the display stopped working When I had a look a...

Here you go - £15 http://www.ebay.co.uk/itm/DRAPER-EXPERT-IMPACT-SCREWDRIVER-SET-12-PIECE-22322-/130556268468?pt=UK_Hand_Tools_Equipment&hash=item1e65c28fb4#ht_2209wt_1329 T40 bit comes included :D

DOH sorry yes

Buy an impact driver? They're like £10 from a motor factors, put a T20 bit in the end and hit with hammer - off in seconds :)