Search results

Genuine or Sachs

Loaded on the trailer yesterday Set out today to swap over my pads to the DS1.11, put my track wheels on and load the car up for tomorrow New track wheels. Genuine X65 Cup racer speedlines, quite a bit different to the 2118 you can buy anywhere Swapped the pads over, fitted my Titanium...

f**k yeah The Clio is locked and loaded ready for tomorrow afternoon

You're just a s**t driver I had 1144 in the Megane and they were fine once you got heat into them👀

It was that boyband with them 4 black blokes that broke up about a decade ago wasn't it?

Don't worry, if someone else doesn't rip the piss out of you I'll take up the slack

I usually go to Opie or I found Fuzz Townsend's Classic oils for it

Aye that's the only thing I could find online I've got a set of M1144 and they're this I thought it only went up to F?🤣

I bought these years ago and I've had them in the garage since MINTEX MDB2725 is just the pad shape. I'm interested in the compound but I can't find anything about them A standard MDB2725 pad doesn't come with the expansion/material clearing groove. Which makes me think this compound used to...

I think they renamed it So MTL is 75w-80 and MT-90 is 75w-90

Just go for redline MTL 75-90 GL4 It's levels ahead

I've got a Quaife gearbox for sale if you're thinking of buying one

Everyone paints me out to be some sort of pervert I'm not, honestly Not unless I can smell the fear from you, at that point you'll regret every single decision in your life. But it's too late, I'll go at you like a butcher with downs who's been limited to...

I'm gonna pull that 4 day rind straight off your chopper

Started the evening by removing the bottom grille My hole saw arbour was MIA. So had to improvise and make my own arbour for the drill. The 13mm nut centres on the bolt. Precision engineering I bought some different bass ports on Amazon last night too. These ones that came with the BYC...

Pinned for when your car needs something and you're big hairy Harvey and wanting some care from us x Also, I'm really starting to look forward to this now The Clio is finally back on all 4 wheels and has moved

Last night @Louis came over to give me a hand and to bring me some parts Before he turned up I got the oil pressure switch swapped out. Managed to steal one from one of the engines I have at work After that we were off to a flyer as you can see... Got the upper rad support bolted in, it...

Yeah undo the 13mm nut on the selector arm DO NOT disconnect it at the slip joint if you value your sanity 🤣 And when you're dropping the subframe don't clag the weight of the subframe on the shifter rod. It will bend, they're made of cheese

I thought I'd have a really relaxed day today, since it was raining again and I didn't wanna be out getting piss wet through I started out running the car in gear, making sure it goes through them all. Everything went fine and dandy. I remembered to drop the passenger window this time too🤪 But...

Ah sorry, didn't realise it was Steve being a special t**t and dropping the hubs and shafts. It all depends if you've got PAS or if you've looped your steering rack/got a manual rack If you've got a proper blokes rack with no stupid hoses it's a piece of piss 2 bolts out the balljoints each...

Why didn't you just unbolt the track rods from the hubs, take the 4 bolts off of the balljoints and then take the bolt out of the rack and column? You could have left the shafts and hubs in the car It takes me about 30 mins to get the subframe dropped out of my car now. It's a terrible curse...

Mine does the same, theyre almost like a toothed clip. See if you can slide it into the upper piece with the door open

Oh I need to bleed the brakles too... 😂

Hopefully on the home stretch now Now just need the 5 series back to tow it to Anglesey...

I got the car started after fitting up a nicely freshly charged battery. The diff then immediately started turning, the Quaife wasn't this savage to spin both shafts that hard 🤣 That resulting in the car thinking it was moving, so it locked the doors. Something I had failed to realise, so I...

Doing some more bits Started by stripping the discs off and giving behind them a check. The brackets @Clio_fool made me years ago are still absolutely spot on! Just need to clean the corrosion up a touch and spritz some ACF over everything Started filling the gearbox oil Ended up...

And then are you gonna do the hotlaps mate?

Aye she's got a bad case of the resting b**ch face This was the other week, she went to jump on top of Jess' car and s**t herself when she saw me sat in it

Danny Hawkins

You'll have to pry me out of this if I make it I will be kicking the f**king things head in for all the s**t its given me