Search results

I thought that but the figures bloke has been posting with 197 cams seems like a great upgrade for the money

Cams and a remap

Does your super duper secret timing increase the performance of standard 172 cams?

No idea then sorry. My sportlines won't come out unless I remove the shocks and they are a similar drop to cooksports.

Have you got the rubber bungs in place on the springs?

Seems 197 cams are the better option these days then, better figures than 438's? How much would I be looking at for a set of 197 cams fitted and mapped? pM me if you prefer.

Silver for me. Not sure about those wheels though

He's converting from hpas to epas. Not sure why, but a lot of people do it. Assuming its one less thing for the aux setup to power?

Variable nozzle turbo

Just ordered a set of genuine front cup shocks off eBay the seller was Renault car parts uk. £78 with free delivery. Almost 20 quid cheaper than rpd when you factor in delivery charge

Who did It? Plenty of horror story's about your average garage doing them wrong without the correct tools

What he said. I'd say age is even more important as the rubber will perish.

Id give the contact areas on the earth strap a good sanding and try again.

Renault don't even sell them anymore do They?

Mine was the Same, it was as if wind from driving would dislodge it after driving a certain distance. When I checked it it wasn't touching, it was the melted arch liner that gave it away so u tie wrapped it well in position and problem solved

Well done. How did you get the one off that was on the wrong way round?

If it's stuck on 1 speed it will be the transistor inside the pack, it's dead easy to replace yourself and the new chip cost me 4 quid for a pair. If you need the heaters while you have the pack out then just short the positive and negative on the connector. I had to do this as mine failed in...

Kwick got charge 45 for a hunter allignment with printout. I managed to get them down to 35 through umming and arring lol

Liner wasnt on correct. I have tie wrapped it in place now as the mounting positions were buggered

I had this. It was the wheel rubbing the liner.

Pre cat. Post doesn't do anything

Could be lambda. What mpg do you get at 70 on the motorway after 10 mins after resetting the clock? When my lambda went there were no codes or eml

Never bought any for a 1.6 it was just a guess. Genuine for my 172 are around 70 a pop.

Get them swapped out. They will only be about 50 quid a side at Europarts and easy to fit

I sheared a stud off trying to undo a stuck on nut so yeh they are not strong at all lol

I wouldn't let it put me off even if I did check them and They were shagged. They are cheap as chips to replace Holes in them seems a bit extreme though, that's a lot of metal to rust through

Both front tyres the same? Check all ball joints and track rods etc

Copied

What model Clio is it? 1*2s don't have an egr valve.

Had the exact same issue. Turned out it was the odd tyre on the front. Rear toe will be a bent stub axel or beam. I corrected mine with some stub axel shims from pure motorsport. Much easier than changing the beam. Stub is easy to change but it wasn't obvious weather it was caused by a bent...