Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
With the movement of the engine and the exhaust, it was just enough to clunk the metal hanger and the metal of the exhaust. Push the exhaust forward and back and you may hear it.
Report back, nothing better than diagnosing a noise on a clio!
How are your exhaust hangers?
I had a clunk that ended up being the centre hanger. The rubber has a metal ring in it and mine wore through the rubber, so the metal ring was touching the metal hanger of the exhaust.
9/8/25
Spotted a silver 182, caged with a KTEC Sunstrip, reg was 6 characters long. Began with a Y I think?
Gave me a flash and I gave a little wave back.
No dickhead.
Maybe it's age (mid 30's) and I'm just slowing down. 😂
What I can say is I still play BF5 and actually enjoy it. Where as Bf6 - if you see me first, I'm dead. And if I see you first you're dead.
It's too arcade feeling for me. But if you enjoy it, carry on.
Played a few hours yesterday and an hour or so this morning.
For me, it's not great. Feels so fast and the TTK is insane. It feels more COD than Battlefield. A toned down 2042.
Run and gun in small sized maps (for battlefield).
Few good things, but overall not what I was hoping for.
Big battlefield fan - excluding 2042.
Question regarding the open Beta, as a console player how can I access that? Can I access that....or is it my fault for being a console player!
I like the KTEC around town or on a blast out. But my god, motorway speeds it's just DRONE.
I guess everyone's tolerance to noise and what they find acceptable is different.
The inner door seal thing cracked a while a go and my OCD couldn't deal with it.
I had tried to glue it but it looked s**t.
Picked up a fresh one from a breaker.
One thing I've noticed recently is how boomy or droney the exhaust is. It's a stealth KTEC resonated exhaust, sounds fine when...
Alright, small update and in an effort to document what I've done.
Spark plugs.
These are the ones I removed and look pretty good and I felt a bit of a mug replacing them, but I did. When removing them, two were quite loose, almost finger tight.
Dropped in a fresh set
Cold start it seems...
Good effort.
You know the drivers weather strip seal at the top of the door you broke. I've done the same and found a replacement.
How does it come off? 😅
Ok, update.
The rear knock that plagued me for so long was down to a faulty reproduction caliper. I sourced a second hand one from here and it fixed my knocking problem, however it came with its own issue. Whilst painting it silver, I noticed the seals were shot.
So I sourced a reconditioned...
Turns over fine, from both hot and cold. It's never not started.
It's just ever so much slower when warm.
I can see the previous owner fitted a new (blue plug) TDC sensor.
Fitted a new one when I did the rad and coolant change.
It was the same (just over 90) before I replaced the thermostat too. It doesn't fluctuate or anything, I'm OK with it. I just wanted to see if it would fix the slightly lazy hot start.
Went for a drive in the Clio last night and.... No change. Needle sits just above 90. It doesn't ever fluctuate and the only real reason I changed it is I read here that a dodgy CTS can cause hot start issues.
It's not that my hot starts are THAT bad, it just feels marginally lazier than a...
Little lunchtime job.
Fitted a new CTS as the temp needle sits just above half way, even before doing the thermostat and radiator, it's always sat just above.
I've noticed that hot starts it doesn't turn over as sweet as it does from a cold start and also MPG hasn't been the best. So...
I'm not a Marvel fan at all, I doubt I could name three films in the series. But I couldn't help but feel like Thanos collecting the infitinity (?) stones placing that number 2 on there.
The 1 and 7 won't be long for this world as they're hanging on for dear life.
For an equally small update.
My side driver side pillar decal had shed it's number 2. Fortunately @Colin-S was splitting his spare badge and I needed the 2 and others needed the 1 and 7.
lb for £(?), the side decal numbers are more valuable than gold.
The collar in the locking wheel nuts had broke so I wanted to fit the standard bolts. I had 3, no idea how I'd lost one, but I had.
Put a shoutout on here in the wanted section and @Krarl came up with the goods. Sending me one in the post.
Yes, this update is about a wheel bolt.
Not sure how you managed that? Genuinely, what's the hosepipe guide?
Also, I had the same with PBS pads. Both track and race (race I assumed would) squealed all the time. I bedded them in, fitted new discs etc still squealed. Good pads though, on a track day. Not for pootling around town.
I was looking at this one
https://www.ebay.co.uk/itm/315809100951?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=jgvchootqq6&sssrc=4429486&ssuid=PwveFb_MRTC&var=&widget_ver=artemis&media=COPY
But wasn't sure if there are fakes out there, like there are for VAG sensors.
RPD and other...