Search results

tough break

really, no help? come on guys

Hi Guys Just wondering if anyone can suggest what should be carried out while rebuilding my Clio Box. A quaife will be rebuilt and refitted. I was told we change front bearings, new speedo hub kit, selector shaft bushes and new seals. is there anything else that needs to be done, what...

Good work Budgie, will try this way when my LSD is rebuilt and if you dont mind I will post up your notes on http://www.ozrenaultsport.com/ cause us guys need all the help we can get!

Nice work but why have you done this 6 times?

Hi Guys Just wanted to know if simply installing a decat pipe in my 182 would be a benefit (power wise) and if maybe also removing the middle resonator will again benefit power wise.? It costs way to much to get something from Ktec sent to Australia and after the nightmare I had with my 172...

Hey Guys Be honest how hard is it to change the oil filter after installing the JMS RS2 Kit ? Cant be done from the top any more can it? Someone said it can be done from underneath? has any one changed there filter this way? is it really possible ? I was going to get a relocation kit but...

Really ? box can come out with out engine from the top? 1st I have heard of this! love the Fail sport avatar too

ended up at local pick a part wrecker, my car 182, and found the same part on a 172, all fixed all perfect steering again.

So one of the brackets that join the subframe to the middle of the car is missing a bolt or two, is this an issue? do these brackets even really do anything?

one started to leak so got the front rebuilt, even after rebuilt they dont really click, GAZ explained not really an issue. just makes adjusting them harder

Re: Help Needed in Australia regards to tuning a 182 with JMS2 Intake Kit RS Tuner Ma hearing that the henks 98 ron map works fine with the new plenum. Is this correct? or do we need custom maps ideally

Re: Help Needed in Australia regards to tuning a 182 with JMS2 Intake Kit RS Tuner Ma yes I know he has too. he has tuned my other car clio but I want to know if anyone has had it make a custom tune for a clio with a JMS2 Kit fitted and if they would recommend it again.

Hey Guys I recently purchased a Clio Sport Cup 182 and have also obtained a JMS2 Intake kit that I am about to fit, Once fitted I understand that a tune is necessary to gain maximum results. Now the only shop that can tune the factory ECU want $1500 (thats 1000 Pound) which is way over...

​Hi Guys I have the standard rack in my 2005 182 F1 Cup and need to replace the bushes behind the rack clamps / mount as 1 is destroyed, I actually found one of a wrecked 172 but it is 4 mm wider then the original one, I think this is only because I needed to replace the drivers side one and...

Hi Guys After having my sub frame out the other week I now have found a little issue, basically where the rack mounts to the subframe there is 4 bolts that clamp the rack down, the rubber in that mount has some how perished, this is causeing a tiny bit of free play in the rack. Anyone had...

I Fixed it at 2am I used a large flat head screw driver wedgded into the bracket then with the rattle gun the bolt some how rattled off. Cheers for the help anyway

Hi Guys Hope someone can answer this I am 90% through removing my gearbox and now find that the one of the 2 rear brackets that join basically the sub frame to wards the middle of the car will not come off. 3 out of the 4 bolts just spin, and i dont see any way to get to the top of them, I...

Re: 172 oil leak from rocket cover plenum area noticeable worse during hard track dri WOW - What a drama, after taking the intake manifold off i was greeted with a sorry sight! - 7 out of 8 bolts that hold the breather plate down were sheered off! only 1 remained - No wonder it started leaking...

Re: 172 oil leak from rocket cover plenum area noticeable worse during hard track dri Sweet will do

Re: 172 oil leak from rocket cover plenum area noticeable worse during hard track dri hey Danny, as I'm in australia I cant make it to you. Would you suggest just cleaning up the area and applying a sealant under and on top of the original gasket ?

Re: 172 oil leak from rocket cover plenum area noticeable worse during hard track dri reading the above to me says there is no gasket correct?

Re: 172 oil leak from rocket cover plenum area / breather plate

Re: 172 oil leak from rocket cover plenum area noticeable worse during hard track dri I tried dealing with Renault parts australia but they are under the impression there is no gasket required under the breather plate. They suggest Gasket Goo. A fellow member of the AU forums posted this part...

oh and its been fine for the last 10k, not bad for $80 AU and he came on Fathers Day even!

had mine done by a guy called thread doctor, he came to my house, smeared some grease in the hole tapped a hellicoil in and then simply pulled out the grease with a stick or something. looked really dodgy and I thought if this works im selling the car but of course it worked, they dont call him...

Re: 172 oil leak from rocket cover plenum area noticeable worse during hard track dri defiantly more noticeable on the drivers side, is the VVT trigger sitting on top of the rocker cover? I always thought that was a oil sensor!

Re: 172 oil leak from rocket cover plenum area noticeable worse during hard track dri sounds very likely now that you say that, any idea on how to fix the issue? is there a gasket on there that might need replacing or just tighten it up? does any one know the torque settings ? Cheers, also...

Hi Guys Wondering if any one has any ideas about this, my car for years now sometimes leaks a bit of oil from either the plenum or from the rocker cover. i dont think its the hose that connects to the air intake as I have replaced that with a silicon hose, I am thinking it is either the oil...

2.5 deg for me!