Search results

Indeed it does, but another ECU costs £70 so it's the cheapest option to start with.

Just to update this, the loom has been stripped quite far back and no issues have been found in the common areas. Generally with Clip if there was a wiring issue it would say which circuit. Andy at Engine Dynamics had a car with the exact same code and they tried everything but they ended up...

Does anyone know the difference between part numbers for the engine loom? The part number on mine is 240112859R, but I have also seen 240118819R & 240116908R

Not great news sadly, driving to the garage it did it again. Plugged it in and the only code was COMP, same as the one I posted before. When you click into that with clip it just says has the owner reported an issue if yes refer to technical. If no replace injection computer. So we think it's...

Nah goes to the redline fine, the old one was definitely shot as the pin had punctured the thermostat. I could change the CTS to be safe, but I think alot of people have the gauge in the same place. Previously I noticed the gauge would go back down where as now it stays solid and car warms up...

If you imagine the gauge reading bang in the middle it's the mark to the left of it.

Just to add to this, when the car had a hesitation first time we plugged it in and got the following, but we were unsure if they were just stored old ones. So if the same codes return we know that they are active. DTC061A61 - COMP DTC042009 - Catalytic Converter Function Fault DTC013011 -...

I didn't see anything, I only caught the orange of what seemed like two lights on the dash for a split second then it went off. I will have to check the dash lights to try and remember which two it was.

It has RS Monitor yes, but it doesn't show coolant temp only oil temp iirc. My code reader is a very very basic cheap s**t one so no live data sadly. It will be plugged in with Clip tomorrow so going to check codes and hopefully that will give us something to go on. Even though I have a new...

Well someone had to say it.

Must be why your Cayman is always in the shop...

Awesome cars, I loved it on a test drive, felt like a modern Clio.

Yer I know, it was a bit of a longshot just to see if anyone else had experienced it before.

Could be, but the car runs fine up to the redline with no issues and 99% of the time its fine. I was thinking the FPR on the rail maybe the pump, it seems like a fuel issue to me.

Yer i thought that might be the reaction. :ROFLMAO:

Hi everyone, I am having a problem with my 250. It only happens occasionally, but under part throttle just slowly accelerating the car can have a big hesitation. Almost like you are hitting a brick wall or just hit the brakes hard, it only happens for a second then the car returns to normal. It...

Hopefully your one arrives. My one was sent out by Hermes (despite the website saying DHL), it never arrived and they are only now processing a refund after it was ordered back in November... Ended up ordering a proper ergo chair instead.

Saw this on detailing world, looks great :)

Yer no worries, I understand. Next time. It probably won't be long before I'm back up that way.

You could of popped over when I was at EFi

Awesome thank you!

Am I right in thinking the 225 width is a little stretched? I think on my Tibors they have 235/40/18 and they are not as wide.

Thanks, how do they sit against the arches? Any side on pics? Just would be good to know for when I order my wheels to make sure the right width and ET.

Looks good, are they 18s? How wide are they?

I would defo buy something like this, I wonder where you got that idea from :ROFLMAO: If I couldn't find a decent used complete system then I would be looking at something like this: CPU: Intel Core i5 6500/6600 Mobo: Any half decent B250 board SSD: Sata SSD 500GB or 1TB (Sata because cheap...

Yer I think so, would defo get the bigger ones. I was always very happy with it and I used to do 120 miles a day on the motorway and never had an issue with drone or anything.

I had the standard cat with their derestrictor welded on it was not loud at all, was the perfect system for the 182 imo and very good build quality, I just wish I got the bigger tips to fill the gap better.

Just got myself a new chair. I had ordered the Secret Labs Titan, but they messed me about so much I got a refund. I then started looking at ergo chairs to help my back. Was going to order a Herman Miller, but then I found Steelcase. Ended up ordering a Leap V2 from Hunts Office furniture and...

Once it's been sorted I will ask for it to be reopened and I will post my thoughts.

I'm not running away at all, at this stage I want to remain civil until it's been resolved. I will say my piece when the time comes, in the mean time everyone can crack on.