Search results

Who did you ask them to pricematch with?

Haha, It does that when cold driving home from work but not sat idling! I'll try film that... Car feels like its holding back for the 400m.

I'll have a look with my cheapo OBD then if it can do these things. I know it can do live data on lambdas. What's 'normal' at idle/load with the map sensor? And similarly Lambda?

Maybe I just drive bad when I'm cold and it's not the car ?

Swapped the map sensor, no change. Got a video of the slight popping at idle, this just normal with a non res decat milltek system? I'll change the lambda when it's not pissing it down! It's on and off which is really annoying

Vband and decat it ? guys at CSK mentioned your new clio when I popped down!

They were from the carpartswarehouse on eBay in 2017 and sold as genuine plugs so doubt they're my issue

It gets all its oil and filters changed every 7k. Did the spark plugs about 14k miles ago but I might have a look at them see whether they're sooted up. Ktec filter was cleaned last weekend too! Never a bad idea as preventative maintenance, they're old cars after all. Cheers Steve

How do I check that Carl? I have no fancy tools apart from a crappy plugin Bluetooth obd2! Just been out in it again now and it isn't as bad as I was probably thinking but definitely something not 100%. I'll swap over the map sensor tomorrow as that's easy to do and maybe lambda if it's not...

I wish that was my problem ?

It's hard to explain, but maybe down to just everything being solid! It's when say I'm changing from 2nd to 3rd as the revs drop down when its in gear and releasing the clutch the car 'jerks'. Only the pre-cat actually does anything on these am i right? I can change it easily enough. Cars on...

I have a genuine lambda I can replace it with aswell as a spare map sensor. See where it gets me!

Yeah, it'll still jerk when warm but not as bad. Literally just had all the exhaust done with a v-band and a crack welded up at the back so that's as sorted as its ever been! Lambda, wouldn't I see an EML? I have none even with decat (Post lambda is tied above heatshield). Interesting you...

Only shell but does it regardless of being 95 or 98 ron

All belts changed less than 2 years ago at diamond motors. Never buzzed the engine so should be OK?

I need to record it really but probably hard to get on camera. It's really bad when cold recently but not first thing in a morning, only when driving home after work. Pops and bangs and holds back for about 400 metres then it's 'okay' again. Never used to pop and bang

So my car has vibratechnic engine/gearbox mounts and an evol mount ( all less than a year old) and black series bushes everywhere else. For as long as I can remember the car seems to 'jerk' between upward gear changes. I tried pulling the engine forward a while back and this did seem to improve...

Great photos there Mark. How's the paint holding up?

@leeds2592

I was interested in something similar too as wanted to replace factory satnav with a custom media centre and have it still linked to the radio in the dash. Following

I always thought it came on as soon as you got below the mileage stated on your mpg.

I've always had a decat mate, it's just that the flange was all bodged on the manifold so was blowing really badly and also cracked at the back. It feels better now it's not blowing but can't comment on how it compares to cat. Not run one in ages and never with this system!

Yeah I'm chuffed! Was proper bad before so I'm glad it's sorted. Might try get booked in for mapping early next year now

Took the trip over to CSK today for my exhaust doing and what a great job they did! Annoyingly I machined the wrong flange lol but nevermind, the non machined one went on more snug anyway! So he cut off my bastardised repair from a year ago and welded on the new vband flange Then took to...

Just spray brake cleaner around and listen for the idle improving...

You've done it under the link of Flickr mate

It's the other one I think that's not on the upper inlet. The right angle on at the bottom? Or am I wrong

I know which one you meant after having my mani off again. It's just the breather to the airbox iirc

Booked in with csk race exhausts tomorrow to have the flange sorted on my manifold. Machined a vband flange recess to 66mm so it'll sit onto the end of the manifold properly without any messing around sleeving it etc (Used my spare mani as a point of reference) Also ordered up parts for a...

Didn't realise you could sell them as they're technically owned by the supplier. Be careful, once they plug it in they'll get all your midget p**n search history on their laptops