Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Did you change the brake pedal switch? Mine was doing this and I changed the front abs sensors when I replaced the bearings in my hubs and it continued to do it.
Swapped over the brake pedal switch with a genuine from eurocarparts and it solved the problem.
Did you fit the spacers on the...
Alien green and liquid yellow 197/200 together on the M1/A1 near to garforth. I spotted you from the other side of the motorway as the green stands out so much haha.
Was around 11:30 ish
Is there damage to the back of the spacer? I noticed that my disc retaining bolts weren't sitting flush on the face so made the spacers not sit perfectly straight.
Removed the bolts and no issues since
I just bought that directly from Nielsen. There's a 5% code out there too. Go for the Halfords orange funnel too as it's a perfect fit for the butterfly fill hole
Allows the cables for the cruise control to pass through without getting squashed, same as on those FB ones. I'll be adding some engravings too but unsure whether to go for full words or just letters. :)
You don't know what I paid! Unless Daniel told you? ;)
It is 'used' but it was apparently only fitted for a photoshoot then removed from the car. Definitely looks to have absolutely no wear on.
Got this on ebay. I've been stuck between which one to get as i was tempted to go for one of the oreca ones but they were just short of £100 imported from france. Momo team black had taken my fancy aswell
Ooh, thought i'd seen it on someone elses car before but couldn't remember! Was it on your...
Just smash the audi off the limiter trying to get out without moving any of the snow. That'll learn him.
Make sure you do it from cold for the extra pops and bangs
http://www.ebay.co.uk/itm/Speedline-2118-Wheel-Decals-15-16-X8-Vinyl-Sticker-Car-Wheels-N2043/401487557068?epid=518312916&hash=item5d7a85f1cc:g:~9AAAOSwvg9XUGD3
Got these today, they're not identical to the originals from looking at photos but they'll be close enough for me.
I did both mate.
All those earths were absolutely perfect as I'd previously sealed up those grommets with silicone. I did brass brush them clean but there was nothing to suggest corrosion at all.
I might just need to have a play with those connectors in the lights even though they were clean...
Another bright sunny day in Huddersfield so I removed the rear lights and plastic trim as have been getting the foglight coming on with the brake. Cleaned up all connections but it's still doing it? I will remove the bulbs next and look for any corrosion. I did notice some condensation in the...
Sounds a plan. Might even pull out the da.
It's not that bad thankfully, just caught the edge coming out of shell. Always going to happen but wanted it to be longer than a day after 😂😂