Search results

2 wires had become brittle and broken in my loom !

cheers dan

Dan do you know what helicoil kit I will need for those bolts ? is it a 6mm ?

I paid £32 each for mine . Listed as a Laguna :-)

Cheers dan , any ideas what the thread is ? Will have to get a kit

I bought a new gasket for the Thermostat housing but I am still getting a leak from the bottom right hand corner. I have found that the thread has slightly stripped so this one bolt in the bottom will not tighten up ! What should I do ? Do I need to get hole tapped ? Or could I use some...

I'm changing the front one first as I believe this one controls the fuel mixture ? The one after the CAT is purely a signal to the dash light I was told ?

I am sad to see this :-(

I've got a new gasket for mine as i have same issue . can somebody tell me torque values . One of tr bolts doesn't want to tighten very well ! is there some form of sealant you can use in conjunction with the gasket ?

It's now running ! Two cores were damaged in the loom ! it was idling at 4000 rpm , I have sorted this now , re-seated the inlet and re-tightened and cured it . Moving in the rite direction now

Throtte body I bought off here is no good ! Put mine back in . Just need to sort these 2 vauccum lines and it should idle ok then . wil have alook when I get home

Yeah they have been last few years , they are getting rare and the prices will just go up and up ! Yeah a lot of the guys on sxoc use them as dailys.

Yeah its a ph2 and thankyou for the info guys. Hopefully I can now get this car on the road at last :-) Im going to dig my standard airbox out , what panel filter should I get ?

No its purely a weekend fun car . It has a racing clutch , full vibratechnics race mounts , race suspension , 8 POT calipers , and totally stripped . The brakes are too good for traffic , I went to work in it one day !

Ive got the Kouki front bumper and Greddy Splitter still to be fitted and my new alloys on order. Its only done 55,000 miles and is running A Garrett GTX2867 Turbo , Just been mapped by Greg at Pro-tuner. It made 384 BHP at 1.3 bar , the turbo can do 2.2 bar :-)

I have seem to have lost the crash panel bolts which screw onto the top . Any ideas what size I need ? Also the big dogbone bolt . I have a bolt at home but unsure if its the correct one or not !

What would you use a bolt or soemthink ? Would that cause it to idle at 4000 rpm or would this be likely to be idle control valve ? No faults on dash or scanner apparently so I am assuming a vacumm issue sorry for my lack of knowledge

I see what should I do with it ? I have an induction kit but im going to put the standard airbox back on. Also the carbon canister has been chucked , do I need another one of the fitted as I assume this could affect it also ? Ay advice would be good cheers

Do replacement throttle body need programming ? My car is now running but its idling at 4000 rpm so my mate is going to try fit my original throttle body which was on car originally . Anythink else to check ? I know I haven't blanked the vacuum line which is located at front of the inlet ...

My mate has got it running , he found two cores damaged , they had gone green so that's 2 of 3 fault gone now. Still got a throttle body fault , I swapped my throttle body for one I bought of here so hes going to try my original to see if that sorts that. Do the throttle body have to be...

My Nissan 200sx turbo

It's probably summit simple as it was fine and i think the fact it's been standing . yeah it has 3 faults on the code reader so whether Afew cables in the loom have broke or failed

No insurance and tax . Brakes haven't been bled yet and no seats yet :-) its all against me :-( why is is my mate such a letdown and no gurantee he will sort it

Yeah it's just hard for me , i would have to get a tow truck both ways

Why don't you come show me why it won't fire :-)

No it doesn't Bloke ! he never showed up , been let down Monday and tuesday :-( apparently he is coming tommorow

Yeah me too ! Can't believe I've had the car so long and never drove it since I bought it 4 years ! accidents and other project had to take priority . Hopefully my mate sorts it when he turns up.

Still awaiting my mate to come back to look at the electrical fault

£36 that's cheap !

That's what I thought , ive ordered one so I will see if the cable supplied is the longer one so I can swap both as I know they are different lengths