Search results

I'm pretty sure Marc has commented before saying someone is making replicas but using his photos. Unsure on quality

It isnt.

This guy is using your photos mate. https://www.ebay.co.uk/itm/Clio-172-182-battery-cover/323885876936?hash=item4b691a46c8:g:w64AAOSwfDtdXYV1

Post some pics.

Pro plates, they're cheaper.

Hello, That beautiful underside is mine. It literally just clips in, no need to remove any bolts or anything just bend it over. Literally takes 30 seconds to fit, i'd also recommend putting some pig mat inside to absorb any spillage.

Can only presume its tension related

Have been before with @dann2707 many moons ago

Nope that's how they're meant to be on the whiteline

100% not the case on the ubolts mate

Fitting guide below.

Are you sure you're using the correct nuts? They're imperial on the u bolts but not sure on the rose joints. Definitely cutting into the nyloc thread and you dont want to be forcing them on.

That nut doesnt look like a nyloc, looks more like an aerotight nut?

Looking good Paul, always like reading your updates. Do you happen to have a link to your camber tool?

Use one of these on the TB? https://www.siliconhoses.com/7050mm_Reducers_Elbows--product--223.html Or is a gradual reduction in hard-line better?

Bought an FMIC with 2.25" outlets, but unsure whether to continue on with 2.25" pipework or go down to 2"? 2.25" would be easier with fewer reducers but don't know if the this is the best route to go? If 2" would I be better using a silicone 70-50.8mm reducer on the TB or reducing with silicone...

If 182 cup PACK then springs are different. You're 100% better off buying some eibach or cooksport springs

Hi Paul, Post pics of 197.

Mental the amount of stories you hear of the spacers being completely missing or in the wrong place. Takes 2 minutes to google where they go if you dont know! Crazy crazy

Stop being a baby

Buy this as a replacement - https://www.ebay.co.uk/itm/Car-Engine-Battery-Earth-Lead-Strap-9-24-Inch-50-mm-Sqd-Choose-Terminal-sizes/322796129172?ssPageName=STRK%3AMEBIDX%3AIT&var=511918310187&_trksid=p2057872.m2749.l2649 First terminal: 8 mm hole Second Terminal: 10 mm hole Length (mm): 228...

Not fan, looks like a decent job though!

Clean the crank first as you said. Then try bump starting... Is the immobiliser light going off?

Yep it can be dropped in from above but you need to get under it to manoeuvre it. Look at my thread where I post a link to the guide and the exact position it needs to be in. Fit heatshield whilst starter is loose and from above

Last seen, august 2015. Not holding out much hope mate!

I run a scenic shifter that I modified in pretty much the same way as the BMS ones come. I'm running a heatshield and decat but there is room. Have to bend the heatshield around so it doesnt catch and I also sometimes feel the gearstick move if the linkage hits bumps with it sitting lower. My...

Get some mole grips on the number plate screws and mount the next ones with velcro or double sided tape

Wider is fine (TWSS)