Search results

I did a buy. Sparco 300 suede wheel. Got it for a price that was too hard to pass up! Goodbye Bus wheel.

I did both mate. All those earths were absolutely perfect as I'd previously sealed up those grommets with silicone. I did brass brush them clean but there was nothing to suggest corrosion at all. I might just need to have a play with those connectors in the lights even though they were clean...

It seems to just be as strong as ever so I might have to do the same!

If they were 15's they'd look ace

7.99

Your classical music will sound great though

You don't like 2118s though so you're weird

Another bright sunny day in Huddersfield so I removed the rear lights and plastic trim as have been getting the foglight coming on with the brake. Cleaned up all connections but it's still doing it? I will remove the bulbs next and look for any corrosion. I did notice some condensation in the...

They don't sit too bad without the 5mm spacers on the rear. I'm not running any with my centre caps

Sorry but I don't like those. Don't know why you'd go bigger on the clio! 15s are perfect. Cheap tyres, feel better on the road.

Sounds a plan. Might even pull out the da. It's not that bad thankfully, just caught the edge coming out of shell. Always going to happen but wanted it to be longer than a day after 😂😂

I thought it was just a normal plate haha.

Jeff, or Marina. Also those plates need sorting out as they look like they should be on a 330d rather than a clio. The 3/4 ones are cheap enough :)))

I just bought the silver ones :smile: I'll take some pictures once they arrive. I was Stuck between this and light grey. Hope I made the right choice :cool: Yeah N2Grafix, he sorted me out with my bullet decals. Hope they're identical size to the originals as mine have some fading on them...

Aye that's fucked. Well if you break it in the future I'd be interested in the front bumper if its in good condition? If fuuucked no worries :smile:

Please get some black gold wing mirrors on the poor thing. With a good detail it'll look a thousand times better

Just literally nothing else is white. Least if I went silver it'll match the rear badges haha

Not bled properly most likely. This a 172 Cup?

Is it cracked and you're missing a part or just a small hairline type thing? I'd try a fibreglass repair on the back of it as they do look so good

What colour decals shall I get for my 2118s? I thought initially black but after a photoshop mock up i'm not so keen! Tempted by a light grey or silver. Don't want them to stand out, but also dont want them to get lost in the anthracite. Thoughts? 20180218_133556 by Louis Walker, on Flickr

When the genuine Renault cup splitters are so ridiculously expensive these carbon ones are very cheap in comparison! Got this one for a great price second hand and after a few coats of lacquer you can't even tell it's used! And I like both! Difficult choice as once you go bass ducts you can't...

It was a dry sunny day for a change so made some more progress by removing the front bumper and finally getting my carbon splitter and washer blanks fitted. First thing was to pop rivet the bonnet stay back on the car. 20180224_145150 by Louis Walker, on Flickr Brought the front bumper into...

Ends tomorrow, grab a bargain :)

How long until Boris is for sale and you're swapping mods/panels? :nomouth::kissingheart:

I'm after having my cat sleeved for the MOT, but i'm unsure on what size pipe to go for. I am currently running a milltek decat to a 2.5" system. This is all sleeved at the minute. Do I literally just need a 2.5" bit of pipe? Cheers!

40, so the wishbones don't move

Make sure to torque up wishbones with wheels on the ground or jacked up on the hub :)

Hahaha. Which part of the exhaust was this on? This looks like a genuine milltek clamp so don't know what the mechanic is on about? The replacement you want is this one if it's a 2.5" system https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/401270456967

Pic of clamp

Yeah that's right. It just means it reads upto 20v so it keeps the decimal in the right place. As if you were measuring 0.1v with it set to 600v it would read as 0, even though there would be a voltage.