Search results

I fully blame @Romanian Shlong Stroker

Have you tried turning it on and off?

Is it only the light that has gone? If so there are a few things that can be done: 1) The PCBs are the same in other Clio brake lights so you can replace the PCB only 2) Replace the PCB with a 12V red LED strip 3) Worth trying to clean the contacts. Mine wouldn't work properly until I cleaned...

Echoing others here hub-centric spacers with longer bolts + correct torque (120Nm) = no issues here, run 20mm on the front and 15mm on the back with 16" 182 wheels

I checked the top mount with sockets, the bottom is from memory. I think the nut on the back of the dogbone is a size up from its bolt. I think I put an adjustable wrench on the nut and undone the bolt with a socket. (My socket set goes upto 20mm so it can't be larger then that)

No worries, will mark up some pics for you tonight

Really easy, the dogbone is just two bolts under the engine. Unless you are really flexible you will need to jack the front up to get at them. If you end up doing the top mount you need to jack up the engine from the bottom to support it. I can grab bolt torques for you after work if you...

The centre bore (CB) of the wheel is probably too small for the Clio hub (Clio hub is 60.1mm). Grab a ruler and measure the gap on the wheel (circled red), anything less that 60mm is a no-go I'm afraid.

Welcome to the Forum. If the wheel won't stay in place it could be that the centre bore is too small to go on the hub? More info on which Clio you have and specific details about how the wheel is not fitting will help with diagnosis.

Doing a quick google search for MK2 DCI pedal box brought this image up from an Ebay listing (https://www.ebay.co.uk/itm/133752838086). Checking your vid it looks similar but I could be wrong, you can see the wider side of the spring near the back of the assembly. Hopefully somebody can jump...

As someone who has no idea where that goes I would try your VIN number in https://partsouq.com/ and see if you can find the relevant illustration of where it lived

Thank you for the advice everyone, priorities seem to be: 1) New metal clip + Keep box topped off and monitor 2) If it continues to leak (or more importantly if it gets worse over time) fit a new genuine Renault boot 3) Then if the new boot doesn't sort the issue replace the driveshaft

Noticed a build up/splatter gearbox side of my passenger driveshaft. Can't see any tears in the boot and it seems to coming out the side, down the shaft while splattering on the steering rack and frame. (Wheels at full lock to the right when image taken). Metal clip isn't loose, can rotate it...

Oh I see, you meant 'where would that be?', not 'what would that be?'

?

I get this issue when the battery in my key fob gets low and messes with the immobiliser (doesn't crank) 🤷‍♂️

Nice to see another Goodwood Green car knocking about albeit mine is a MK2, lonely green gang. Lovely!

You can just about see behind them, lots of room at the front as you probably know. Grab hold of the engine while off and cold (best grabbing something metal rather than the plastic inlet) and give it a shake and see if it moves. I have replaced my mounts recently and there is very little...

Is it affected by direction of travel or incline? How old are your engine mounts? If performance isn't affected it could be something hitting something it shouldn't. My heat shield on the firewall came loose and rattled on the back of the engine block, also my exhaust has rattled in its mount...

Source: https://cliosport.net/threads/how-to-remove-bar-in-boot-behind-rear-seats.300783/ Should have the metal Isofix bar underneath as @Stuflac suggests, you can see the two hooks exposed at the back of the boot in this image that I grabbed off the interwebs (Ignore the red):

https://www.ebay.co.uk/itm/264881067240?hash=item3dac2454e8%3Ag%3Aol0AAOSw9lZfcw2E&LH_ItemCondition=4

Strip the interior and add racing stripes HTH

You already know where to get it, otherwise it's the waiting game to see if one comes up second hand. Last one I saw was on Ebay and was buy it now for £40 3-4 months ago fyi

There will be a little inlet between the headlight and grill that lets cold air in and the battery tray keeps the heat away. It will sound better with a big foam filter but in the engine bay it will be sucking up hot air and will hurt performance, all 75 ponies of it 😂

Maximum gainzzzzz!!! Some come up second hand on Ebay once in a blue moon but otherwise I haven't seen any other alternatives, there probably is a way to fabricate one with some effort but I could never be faffed to go that route. I settled for a Pipercross Foam filter but recently moved back...

Are you asking how it's done? or the exact measurements?

From what I have seen online it was either a kit or fabricated to spec https://racemarket.net/hill-climb-racing/hill-climb-racing-parts/chassis-hill/renault-clio-s1600-chassis-i2794

Those rims are amazing on it IMO although not to everyones taste. As you say would get more for selling them separately I'm sure

Trim is easy to remove but i believe the seats need to come out. As @Cub. suggested an image would be useful when you next get the opportunity to.