Search results

Well ive deffinately seen 1.6 16vs with rear disks !! And was informed that the ones with EBD came with them and the rest didnt !! Maybe he confused EBD with something else ? really weird though, becasue when i was going to buy my 1.4 dynamique i REALLY wanted a 1.6 because of the rear disks ...

The 1.6 16v with EBD come with disks on the rear axle aswell !! You can fit this to yours !!

http://erc.qmuc.ac.uk/cliosport/gallery/full/1079556685__DSC00996.jpg The phase 2s arent that bad and the turbines can be had for pennies !! Cams and vernier pulleys should be about £500 fitted and a chip will be £200 ish !! Thats your £700 then the BenR headwork can be bought on the sale of...

SS shouldnt rust !! Thats probably made of mild steel !! What exhaust is it ? and where did you get it ?

you deffinately want the vernier pulleys aswell !! And the timing all set up proffesionally aswell as a chip !! sell the 17s to fund the headwork !!

100 a month !! lol i was paying £220 a month

probably but its seriously worth telling them every mod you do !! If they can find something to stop them paying out they will !! And youll be shafted !!

Whats £10 a month when you have the chance of losing your car ?

How would water get inside the engine ? Through the inlet manifold ?

sell your wheels then !! 17s will slow you down, the 15s look better anyway (IMHO of course), get BenR work, cams and pulleys and have a chip setup on the rollers and youll have a VERY quick valver !! Ask Craig aka adams_16v for a ride in his and your mind will be made up !! if you blow the...

sell your wheels and get some cheaper phase 2s !! This will give you about £ 800 - 900 to spend !! you could have the works done !! BenR headwork, cams, pulleys, chip or maybe save a little more and get a willy lump !!

Pull back all of the roof lining and undo all of the bolts for removal, as for the clicking, are you holding down the button ? because if you hold down the button when its shut the motor might still be trying to close it and keep clicking !!

lighter wheels, perspex windows, carbon bonnet, dont eat very much, the second fuel tank (ie have a straight through pipe)

youll need one of these !! http://www.ultraleds.co.uk/product_info.php?products_id=410&osCsid=4209ecacba3877142a6a91949da5f330http://www.ultraleds.co.uk/product_info.php?products_id=410&osCsid=4209ecacba3877142a6a91949da5f330 Its an osram 12/1.2 !! The clock has an orange lense in it as...

best to jack it up a bit !! But not essential

Ive recently changed mine !! Mine went because there was a big rusted hole in it !! i dont think the rad weld or similar will help much really !! Might block it up for a bit but not worth it !! If you wanna go cheap replace it yourself, they are only £15 ish for a pump !! ill change it for a...

:p

Change the belt aswell !! Just for peace of mind !! thats not a bad price for both !!

cheese where u based mate ? If your local ill have a look at it for ya

Yes and you can get free installation if you take up this offer !! http://forum.cliosport.net/display_topic_threads.asp?ForumID=6&TopicID=76025&PagePosition=4http://forum.cliosport.net/display_topic_threads.asp?ForumID=6&TopicID=76025&PagePosition=4

Yeah as dean says go for a panel filter over an open IK anyday !! But as you said you want noise !! A panel filter wont give any increase in noise !! A maxogen will give a slight gain in noise !! The noisiest IK is an open one but these are also the worst for power and cleaning the air ...

ITG maxogen £330 ish BMC CDA £ 250 + Pipercross Viper £200 with the cliosport deal all of the above will give you a good gain IKs like the normal pipercross £ 60 ish will give a small loss or nothing at all but will give a nice roar !! Youve bought a performance car it would be a...

REMAP is much better !! if its specifically suited to your mods then thats the best option !! will this be done on the rollers ?

K-tec do a relocation pipe AFAIK that will take the IK away from the side of the engine !! Although its still an open IK and will suck in the hot air from the engine bay !! either get a closed IK, relocation pipe or standard airbox with a performance filter !!

Has has got a splitter from the genuine renualt body kit !! the splitter is a 3 piece jobby !! Looks nice !! Im sure hell post up when he sees this

9815 or 9813 !! Depends if u want silver and blue or black and green !!

mines a 1993 L reg phase 1 !! The PAS pump is the part at the top on the last picture !! If i knew the type number for our car i could find the part number in the dialogy !!

http://erc.qmuc.ac.uk/cliosport/gallery/full/1079702746__PASpump.jpg

http://erc.qmuc.ac.uk/cliosport/gallery/full/1079364679__DSC00927.jpg The pulley on the right is the PAS pulley http://erc.qmuc.ac.uk/cliosport/gallery/full/1079702284__DSC00926.jpg The metal pipe coming off is the main PAS fluid pipe !! Hope these help i didnt get a part number for it...

1 is the hydraulic tappets they may need replacing 2 Run the car with the bonnet open and get someone to rev it, then look where its coming from (maybe engine mounts) 3 Check the plastic sump guard under the car and the arch liners !! if these have come loose they could be rubbing on the...