Search results

Theres no point !! You need the key to get the old one off anyway !! And you should just buy the plug and washer from renualt coz theyre only cheap !!

Yes its a square plug as apposed to a hexagonal allen key !! and mine is 8mm so would have thought yours would be the same !! They are only a couple of quid from any spares place !!

Nice one mate deffo sounds like a bargain !! Where in the midlands you from ?? Im from solihull,Birmingham !! Nice garage full you got there !! lucky git :D

I dont think its just clios TBH just the attitudes of youth. Inexperience mainly and a little too much testosterone !!

you get the anthracite wheels with the cup suspension !!

I reckon the crossmembers and bits with the bolt holes could be changed over because AFAIK they are only bolted on !! so the lights would fit properly !! Ill try and fit one of the 16v lights to my phase 3 if u like tmrw ??

im gonna do it to mine eventually !! Ive got the LEDs just wanting some spare dials and clear or blue perspex !!

On the mk1s the bulbs are clear and the panel has an amber sheet on it !!

I cant see them changing this between the models TBH, theres got to someone on here with one of those parts CDs who can check ??

The 57i is a K&N induction kit as sponsored by http://www.barryboys.comwww.barryboys.com it doesnt work as it sucks in all that lovely warm air from inside the engine bay and lets crap particals into your engine increasing wear !!

LMFAO !! Dont do this unless you want to ruin your engine !! The filter is there for a reason and drilling holes voids the purpose !! Dont get a K&N either as youll lose power from it !! The only thing that will make your car faster will be the K&N sticker you put on your car :p!! FFS stop...

Not the most accurate measuring ive ever done but you get the idea !! The spacing on the bolts appears different !! You could always aquire the crossmembers etc from a valver and fit them aswell !!

http://erc.qmuc.ac.uk/cliosport/gallery/full/1078249582__DSC00932.jpghttp://erc.qmuc.ac.uk/cliosport/gallery/full/1078249582__DSC00932.jpg http://erc.qmuc.ac.uk/cliosport/gallery/full/1078249621__DSC00933.jpghttp://erc.qmuc.ac.uk/cliosport/gallery/full/1078249621__DSC00933.jpg...

Maybe your exhaust isnt mounted right then !! Is it hanging lower at any point ??

size wheels you got ? would have thought you could go a lot lower than that !!! Ive heard of 120mm drops on non 16v mk1s !!

dunno TBH came like it !! Was told 35mm front and 55 mm back but its lower than that when compared to bubbles of that same height !! And mines a 16v remember so lower as standard !!

depends on the type of hump......... When there are two little ones (one in each lane) i tend to put one wheel on each hump When its one big mofo i just go as slow as possible and hope it doesnt scrape

would have thought so !!

Yeah my centre section scrapes on every small bump going !! not major scraping tho !! Mines quite low aswell !! http://erc.qmuc.ac.uk/cliosport/gallery/full/1069437266__DSC00840.jpg

needs doing every 72 k but its reccomended that you change it every 36k so probably does need one !! They are about £160 to have done IIRC

get a supersprint = no need for ICE as you wouldnt hear it anyway :cool:

:confused: maybe not then

Yeah sure !! where u based ?

Depends how they are fixed !! They are most likely gonna be glued !! In which case you wanna heat em up with a hairdryer and try to pull em apart !!

Make sure the cambelt has been done !! As powelly says the phase 3s are really good !! When was the partial SH ?? Has it been serviced recently ?? Id offer £1400 - 1500

Think there might be a little modding to do but generally its just a swop over !! You gonna get some 16v arches aswell !??

The rear arches are wider aswell, the front and rear track is wider, a lot faster, DOHC 16 valves, some had FULL leather not half, comes with an alarm and immobiliser all factory standard, front and rear vented discs !! This isnt just n RT with a bigger engine there are a lot of other things...

http://www.motorsportworld.co.ukhttp://www.motorsportworld.co.uk you can get an ITG panel filter from here !! Mine took 2 days to come aswell !! Well rapid !!

Yup straight swap !! Phase 1s look better !! ;)