ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Search results

  1. Martin_172

    Clio DCi mk2 ph2 in limp mode?

    is it showing any warning lights? id be starting at the boost pipework to make sure its not got a boost leak. my old 65 had this problem.
  2. Martin_172

    Clio MK2 PH2 1.5dci 65bhp - Air Intake Induction Hose/pipe split! Help?

    common fault on all the clio 2 dci's, you struggle to find one thats not like that. make sure you get a perfect seal if using a non genuine pipe at the bit that comes out the airbox as it makes the car very loud off throttle!
  3. Martin_172

    ohew.. burnout

    smoke tyres not drugs
  4. Martin_172

    Removing overspray off tyres?

    ive used a scotch pad before, worked a treat
  5. Martin_172

    BMC CDA Intake Systems for 1.5?

    adams is already remapped
  6. Martin_172

    Friday Afternoon Road-Rage, resulting in 1 x Dented Trophy, a short story...

    lol england sounds like a s**t hole
  7. Martin_172

    ohew.. burnout

    its not a good car its a cup lol
  8. Martin_172

    Lowered.

    after a few months it will burst the dampers and it will be bouncing all over the road! id never fit just springs to a non sport again!
  9. Martin_172

    Lowering problem again.

    if its spinning then your obviously not using an allen key?
  10. Martin_172

    HELP!!!!!!!!!!!!! (It's not urgent, honest)

    this, they didnt leave the factory s**t, so they can be put back to the way they were! id be getting in tough with the guy on here (is it G172?) that sells brembo discs and pads cheap as chips, ive had a set on mine for a month now but not drove it to try it out yet lol
  11. Martin_172

    Lowered.

    lol give it a month until its burst the dampers! see how it handles then ;)
  12. Martin_172

    Wheel stud snapped flush with disc.

    lol at people saying buy a stud extractor! get the disc off its 2 bolts for the caliper and 1 or 2 for the disc! what id be asking though is why did it snap, were you cross threading it? ir were you trying to remove it, if so, mole grips are possibly going to struggle!
  13. Martin_172

    Lowering problem again.

    ive done suspension on loads clios and on 2 of them one side wouldnt budge! one even with a buzz gun and we ended up resorting to an angle grinder on one of them lol
  14. Martin_172

    Mexican Clio "Trophy"

    looks to me like a 182 cup with turinis, trophy stickers and recaros :)
  15. Martin_172

    ktec recessed system - problems fitting! URGENT!!

    eh? its got a join in it? all you do is fit it, cut the hole and then raise it up until it sits nicely
  16. Martin_172

    BMC CDA Intake Systems for 1.5?

    lol cant even remember that reply above must have been in a bad mood! yeah no gains to be had really and they sound terrible with a filter on them, i tried it with a cone filter a few yrs ago, they make a loud groan off throttle!
  17. Martin_172

    clio mk3 turbo

    forge do one for this engine, as you said you need to use one with the proper spring in for the tiny pressure the turbo runs im sure
  18. Martin_172

    show us your mk3's

    kia sorento is a different car though, one of my cars runs brilliant on shell v power, doesnt mean my dci does ;) lol!!
  19. Martin_172

    Should I buy a 197?

    ive driven a few and where corsa B and C's were just dangerous, the newer shape ones are better but still bland, seriously. try a clio!
  20. Martin_172

    show us your mk3's

    £200 per car. dont waste your time with tuning boxes all they do is ramp up fuel pressure and end up braking the fuel system
  21. Martin_172

    new car

    i like the vtec this sticker just to wind up the honda bams
  22. Martin_172

    Should I buy a 197?

    you may find the clio bland looking compaired to the corsa (obviously this is all down to personal preference) however the corsa is EXTREMELY bland to drive, the clio on the other hand is a riot!
  23. Martin_172

    Replaced cluth recently and its still slipping Clutch

    either way if the clutch is slipping get the gearbox off, everything inspected to see whats causing it first before you go replacing clutches again
  24. Martin_172

    Mk2 Ph1 bonnet.. can it fit in the boot?

    cant answer ur question but last time i tried a bonnet no it didnt fit and resorted to this! lol Uploaded with ImageShack.us
  25. Martin_172

    The PH1 172 Appreciation Thread.

    Mine going for it! still 1000rpm away from the raised limiter, would have needed a hill to get another 1mph out of it, the thing was flat out for about 5 minutes to get that lol!
  26. Martin_172

    Replaced cluth recently and its still slipping Clutch

    and why had the clutch gone? ive replaced 1 1.2 16v clutch, it was an ex driving school learner abused car on 140,000 miles. what miles was it on?
  27. Martin_172

    Scottish Newbie!

    my guess would be you have trapped a wire at the back of the headunit and shorted something out and blown a fuse. i had a look at one for a boy that was doing that before. sorted the broken wire, changed a fuse and it was sound!
  28. Martin_172

    clio 200 test drive

    i like the rawness of a mk2 clio, screw driving one every day though! mk3 FTW!!
  29. Martin_172

    Ph1 172 engine into 1.2?

    fits straight in everythings the same, jobs much easier doing it the way your doing with a crash damaged car as basically your just re shelling the 172 straight over
  30. Martin_172

    Replaced cluth recently and its still slipping Clutch

    clearly your not reading the advice your receiving. as danny said it sounds like the gearbox main shaft seal is leaking onto the clutch, personally if im changing a slipping clutch the first thing im going to do when the box is off is have a look to see why its slipping, general wear and tear...
Top