Search results

PEC. I haven't ordered yet though. I can give you a ring on Monday. Do you do the valve springs too?

Works out at £21 per valve. I'm contemplating some bigger cams, maybe 422 or 423. Does anyone know if they clear the pistons or do they need cutouts?

Then it'll be ready for ITBs and plenty of track abuse ;)

Well its getting a port and polish, Supertech valves, new guides, new seals and Catcams valve springs

Are they prone to wear?

Sending the head off on Monday for a port and polish and some new valve stem seals. The engine runs very well and is on 87k so is it worth doing the guides for an extra £200 (I'm not even sure they need doing) or just get the seals done?

Nice socks! PMS kit looks good too.

Re: Ph1 172 Head off and bottom end looks mint! TBH I'm not even 100% it was even the head gasket leaking. Oh well its off now so get the head freshened up, bolt it all up and crack on with the rest. Shame I'm going to miss the track day, only way I can make it is if I don't go ahead with the...

Re: Ph1 172 I guess so. I'm worried about finding the pistons rings and bearing shells needing doing too when its all in bits. Yeah mine isn't mint enough for me to worry about binning it

Fair play! We've got a D90 and a few lenses but don't know anywhere near enough about how to use it or edit photos :o

Re: Ph1 172 I'm 50/50 at the moment. Could break it and get a minter off here and have some change! Oh I don't know...:(

Re: Ph1 172 No, got a couple of guys interested in the DTA ECU and still got the intercooler, boost pipes, rad, inlet and some small bits to shift. I'm considering breaking it right now whilst it's all in bits...

Re: Ph1 172 Yes, I couldn't at the time. I can now though :( ffs Going to miss the trackday on the 23rd too, at least it won't be rushed though

Re: Ph1 172 Went to the garage again with the ARP bolts and gaskets and my mate pointed out that oil is leaking from the back of the engine from the headgasket. I give up now, wish I'd never bought the stupid car.

For good prices my friend is a Poorboys distributer :) www.waxmonkey.co.uk

For the money you can't complain. Does a decent job. I've got the black hole, professional polish, Natty's paste wax and QD+ with carnuba

They won't be anything special. Generic twin tube damper and adjustable spring platform

There's a couple of good rolling roads close to me, this place being one of them. http://www.silverstoneautosport.co.uk/rolling-road-a-mapping.html But I guess they won't have the means to do it?

Didn't realise they could do it! Yes they are a little closer but not by much.

I'm in North Wales, RS Tuning is roughly 2.5 hours away. Is there anyone closer to me that can map the standard ECU?

Let it breathe to atmosphere or get a catch tank

Mk1 valver vs Ph1 172. Both running the Ph1 setup

My gearbox is off for a rebuild at the moment. Will this seal get replaced?

JJC do alloy brackets so it'll fit under the passenger seat

Might no be applicable to a Clio. It was on an old Fiesta so the way it mounts will most likely differ. I'll go with the top hole anyway. Currently the car has 0 camber both sides, strange seeing as its on Cooksport springs. Anyway if I turn them to MAX either side will that be 1.5 or 1.75...

It worked. And it's been that way for 3 years.

Do you fit them in the top or bottom hole? I know it's usually the top hole. The reason I ask is a friend fitted his in the bottom hole to get more camber adjustment.

For a track car what would you go for and why? A Mk1 widetrack with 172 bits or a Mk2

Re: Ph1 172 I'm still debating whether to try and make a trip to Paul at RS Tuning or get Henk to do a map. In the long run I'm planning something else so I'm leaning towards a custom map by Henk at the moment.

Re: Ph1 172 Gearbox went off to GEARS in Southport, it'll cost a bit more than Agency but I've used them a few times before and they courier it both ways for free. It'll be running Cup gears so 3.09, 1.86, 1.32, 1.03 and 0.79 with a 4.07 final drive. I couldn't get the 4.21 final I wanted or...