Search results

Yes you need them, otherwise your pads will fall out other wise! Halfords sell the fitting kit for it

Have a look in the projects thread :)

Lol corrected power is 164 ;) I'd say its quite accurate :p

Where were you parked?

I didn't realise people actually drove cars with this much camber! A huge bodge to get it done too, check out the bolt lol! Also how does he steer this thing!

Lol I know but if that photo was taken after a couple laps around the 'Ring with -3 Camber it would be good too see!

Sounds like a sensor TBH

Replaced coil pack as was told it was that getting hot and probably fucked it. Still there though, only feel it some times usually in 3rd gear. I'm going to move the coil pack eventually into the bulk head to keep the heat off of it. Here's a RR graph from a while back, I've had 3 RR runs and...

Awesome, never knew this, Cheers Danny My pedals sit like this --_ althought the clutch is actually lower than that so they all kind of sit \ but not as steep lol!

It does all depend on what you ware goin to do with the car really. If you want an everyday car thats comfy and easy to drive with a little poke get a Ph2. If planning on just having a quick car, get a ph1. I've got a Ph1 and love it, best car I've owned and IMO its the more agressive looking...

ME :) Where you the one I flashed last minute!?

Driveshaft, inner joint of drivers side was shagged!

You can clearly see the inside of this tyre and where it would wear if camber was -ve I know you could see rollcages from outside, but when you get in a car which you have installed a rollcage in, will it show it going through dash or down the side of the a pillar etc..

The oil temp effects the rev limiter ;) Although I also do think water does too as sometimes itll go all the way the 5 mins later it won't :S its TWENTY QUID from the stealers! Fitted mine just now, will wait to see difference in a bit :)

Finally got my knocking fixed today and got a different driveshaft on :) Car has never felt better, can't wait to get the new engine mount on too! Also got my new water temp sensor fitted, moved the headunit under the glovebox, perfect fit, just need a way to secure it side to side, just put a...

Thanks :) Ive decided that the two oil ones are going where the CD player usually is mounted on a carbon fibre backing plate, and the boost gauge will go in the centre where the clock is at the top. CD player will then be moved into the glovebox and usse the steering controls to control it :)

I can make you one up to an exact length, just let me know the size you need :)

Few thoughts.... 1. I wonder if tyre wear will show on the tyres? Also if the camber is -ve, will the inside of the tyre show wear and the outside less? 2. Will you finally be able to see a FMIC fitting snugly behind the bumper? Will exhausts look different after an upgrade? Will rollcages...

Lol, I can't because all the willy waving after getting the charger they may fall off ;) Hopefully I will of finally diagnosed my problem :) Not driven car properly in months :( Good result then :)

Gearbox was rebuilt last year :) Still under warranty. When you driveshaft went was it just vibrating, and it got worsre and worse up tp 70 then it stopped as was spinning past int centralised itself?

Lol, ok mate! Be good if you could! Trying to work out how I'm going to get the oil pressure and temp gauges in though, anyone else done it?

Hmm, maybe thats why my diveshaft is fucked now then lol? Getting driveshaft replaced tomorrow so we'll see :) Gauges also came today so something for the weekend!

You will feel the back end starting to come round as it loses traction. Usually going in hard and letting off will do the trick! I'll see if I can get som videos!

Contrast ratio: 1000:1 Pixel resolution: 1680x1050 Terrible contrast ration and not even Full HD by that!? Plus, TV is s**t. You want to be spending £400+ for a half decent TV

^^^ Looks so bad, although think I've seen it on here? Tripoding is easy, just go into a big roundabout hard turn, brake if you really want, just have enough room to understeer into! I do it on the reg!

Its going to be tight!!! LOL!

Yea ebay, performance-trim.com do. No where near as expensive as streamline I'd imagine. Also can cut out the holes you want. Although to get to Brisbane, it may take a little while, UK lead time is 10 days!

Where is the temp sensor for this? Mines done this since I bought it!

try gaming chat. I swear its not hard to see where to put the correct thread but it happens SO much! Can I be a mod please!

Insurance is a little high as only 21, driving nearly 5 years, 3 years NCB and three points! I've decided now that if one fits where the Radio display/clock does the boost gauge will go there and the Radio is getting moved into my glove box and the two oil ones mounted on CF plate fixed in...