Search results

its all pointing towards a duff injector. Will hopefully diagnose and change it this weekend. Glad its not my daily car, having a second car has been a god send recently!!

Yep. Getting new front tyres....before it decided to become a three cylinder

I know the exact one you mean. It parks/lives opposite my parent's.

Have had a P0201 error back in August - car was sat unused for a week in the pouring rain. Misfire, three cyclinders and before I could pull over it was fine. It has been faultless ever since, although the car hasn't been used much since as it was taken off the road a few weeks after. The EML...

I have seen this thread, I probably should have paid a little more attention to it. I don't have the car with me atm so I can't do anything to it to check (unless my brother is tinkering with it). I am tempted to change the coil pack and HT leads as well as a precaution anyway. Did you replace...

Those wheels are realllllly nice. I think I may have found what I want to replace mine with now!

OZ F1's in Ford Electric Orange. Need to be done again.....and professionally.

Job for next weekend then when I get back home! The OBD reader I have has picked up a previous injector issue and said which one it was a few years back. It seems to work well on the Clio compared to the other cars it has been used on. All these problems have to happen when the car is back on...

how do you check for a bad injector? Swap them over and see if the misfire changes?

it's not snapped, it just wiggles.

Time to start swapping the injectors around to find the bad one?Or I did read somehwere to unplug each injector inturn while running, if it makes no difference then that is the bad one. But I don't really fancy pulling out injector plugs while the car is running! Or I just need to man up I did...

Presume the coil pack off my 1.4 daily Clio wont work 😂 From what I can find, there is no evidence of the coil pack being replaced in the huge stack of receipts I have. Car is on 167k miles, so it may be time to change them anyway! Just from past experience and what I have been told...

Having issues with the car running on three cyclinders, also idles like a pig. Started with a constant EML Saturday morning, which the OBD reader said "Random/Multiple Cylinder Misfire Detected" (I was expecting a crank sensor issue as it hasn't been starting). Car ran fine on all 4 cylinders...

I still need to figure out how to upload pictures direct from my phone! But here is one of the spark plugs, they all look the same Oh and obligatory alignment print out when I got the new tyres fitted :tongueclosed: not sure how the right rear camber can go from OK to bad without it being...

That's the better bearing iirc, those kind of things I would rather go for a better quality item. GSF do the same bearing and members get discount there. Also be careful when pressing the bearing out, I bent the calliper mounting points on my hub as the bearing was proper wedged in.

I thought it was some kind of theft protection to help stop or make it harder to force a screw driver into it. I may rip mine out if others have, it does weigh quite a bit!

I was right, I have had a falling out with the car today.....it's decided to be a three cylinder :weary::rage: after checking all plugs, leads and injector wiring and resetting the EML it was running fine, I left it idling for ages. Then went to drive it, got less than a mile and EML came back...

I think it is a better piece of kit, it looks a lot sturdier. Also doesn't hang as low underneath the car as Whiteline. From what I have driven the car it has made a big difference.

I bought it second hand unused. I paid £160 for it. I think they are £190 new. Is it for your RB? As I don't suggest getting the 22mm one like I have! It's quite stiff! The 19mm is probably a lot better for normal road use. After a bit of looking I the engine bay....crank sensor look fine. I...

Apparently it is a "Random Cylinder Missfire". Great! All spark plugs look ok, cool pack looks fine and so do the HT leads. Need to check the injectors next. Could this be a crank sensor issue?

I have a strong feeling I am going to fall out with the car today.....the EML has now come on. Need to get the code reader out when I get home and see how much this is going to cost me. Then I need to try and sort the exhaust out as a temporary fix. But getting tyres fitted atm, been told have...

Rather you than me!! I don't really fancy taking air bags apart, I can see it going wrong

I don't even know what the paperwork it was to have it weighed, it was like an MOT certificate kind of thing. I know there is loads more to come out of it, just future problems......will be going plastic Windows hopefully this summer. Cage is needed before j start going fibreglass panels.

When I first got the car I am adamant I saw a piece of paper that it came with which said 862kg but I cannot seem to find this piece of paper again.....but I am very sceptical about this figure. I think I can add about 100kg onto that figure! I would like to get it weighed, see how far away I am...

I removed my air bag from mine when I got the top dash flocked and it did leave a hole. So I glued a piece of thin black plastic underneath to cover it up. Pictures in my progress thread if you need.

This sounds complex!!! I hate anything electronincs or electrical!!! I may just get what fits without modifications!! WIll have to have a look before I buy and then not get it now

How revised? Will it work in in an old loom if mine isn't the new loom? The car is an X reg originally.

Apparently there are two crank sensors I can get for the Ph1 - a blue one and a black one. I don't have the car at hand to check what one I need, but what is the difference? Think I read somewhere that the blue ones are not as good. But will either work on the car? I think I remember that it is...

May have to wait until next month to pay for this 😧 need tyres, exhaust and tracking done on the Ph1. Its that or I eat beans and pot noodles for the rest of February

Tyres have now been ordered, so when fitting them I will get a 4 wheel alignment. I am thinking it is alignment, but just wanted to check as I would be annoyed if it wasn't then it is money wasted on the new tyres and alignment!!! Thanks for the advice