Search results

Not true, they're green from factory.

This is nothing and purely from incorrect jacking. These points get weak and fail as you've seen. You can also get lines easily, dont be fooled by the garage

I'm more thinking about the earthing from the horn if anything odd has happened? Itd be lower end of the solutions but worth a gander. The wiring can often burn out

It doesn't have an aftermarket wheel on does it?

Sounds earth related to me

Cut off with a reciprocating saw either side yeah 👀👀

Washed it, went to Morrisons, pulled some grannies.

This was brand new only a few months back!

It's a halfords push in bung behind the cap, then it's a fibreglass mega carbon rear wiper blank that I've painted in satin.

Eventually 😂 I'm in absolutely no rush at all and buying parts when bargains come along. It's currently insanely cheap!

Test fitted the intercooler, drilling out the holes more in the top of the crash bar to get the threaded bar through. Measured up well and it sits pretty snug against the condenser! I painted all holes with primer and paint to protect from corrosion. The plan is to cut away the lip on the...

Yeah it is a b*****d. Needs some locating tab on it really!

😂😂😂😂😂😂 I still remember your face when you f**king checked them. Fantastic. And that rear shock bolt you torqued up 👀👀👀

'Let me just check these wheels at this lay by before we rag it through the dales' - proceeds to wang another f**king full turn on with a 1inch bar to each nut 🥵😂😂😂😂

I've had problems with them not torquing them properly before. Remember the eibach camber bolts have a different torque spec to the actual standard bolts. The new place I go to actually gets his impact in onto the bolts then checks them with his torque wrench. Never had a problem! Glad you're...

I take it all back.

Ps. Your double nut wishbone bolts are sketchy 🥵 Get some nylocs ya tight arse.

The subframe itself has no adjustability on it as it has locating tabs, so unfortunately this wont have just moved if it was the culprit. It is however very strong so I'd be suprised if this was bent! Saying that the c***s smashed into you at quite some rate to bend the tie rod like that. I'd...

More fun burning then though

Get them somewhere near torque before putting the full weight down.

Yeah okay, sometimes if the bore has been cleaned out the bearings will not be tight. How did they feel going in? What torque are you also putting on the hub nut? Slightly unsure whether you've tightened either at the moment?

How did you clean up the hubs?

Which will be pieced together. It's not impossible but it's not the method to choose.

Zero chance of doing these 3d printed 😂

Yes and yes. If you're stalling itll sometimes struggle to restart. Dont stall and itll be fine.

25k for 250 arch liners 😂😂😂😂

https://www.amazon.de/gp/product/B08GS7748F/?tag=cliospnet01-21 Tempted by this. Would need a heatsink though... presume they allowed room under the cover for one?

Looks a bit plasticky! Hows the quality feel? I have a cheapo sunjoe unit and it's actually awesome. Pushed out the brembo pistons no problem

Push it real hard