Search results

If you don't mind replacing the sensor then it's worth trying it solid mounted first mate. I'll be revving to 8k, so I did mine the way in the pics.

Put it on a fly lead so to speak, so don't put it straight into the sandwich plate for instance. This is how I did mine:

Good decision Mr H. Don't mount the oil pressure sensor solid if it's a spa gauge though. The harmonics off the engine will kill the sensor.

If you remove all the pipes off the steering rack, they will pull out from the wheel arch without the need to drop the subframe.

@George@RTR_Parts has some good advice for bedding in ds1.11's but I'm fucked if I can find it now.

All I do is 10 medium stops from 60-20, then drive for 5 mins normally without using the brakes. Then it's 10 heavy stops from 80-10 but never stopping fully. Then, same thing as above. Drive normal for 5 mins without using the brakes. After that I use the brakes reasonably lightly, then leave...

Another sex pest!! @RMDavis you best get lube.

Flol!

😂

Touting for sex? Lol

I've only had ds2500's so I have nothing to compare them too other than yellowstuff. The yellowstuff survived half a lap of the 'Ring before they overheated. The only good thing that came from that was finding out that I could take one particular corner at 110mph. Lol! Not like I had any choice...

Cheers mate. I don't know what they'll look like after a track session with the ds1.11 pads. I was previously on ds2500's and tbh, they were pretty much dust free!

Yeah I'd agree with that 100% mate. Lol! Up close and personal it's not as clean as you would think tbf.

Could be the lifters needing to fully jack themselves up again. What oil you running it on? How long has it been sat as well? Have you replaced the spark plugs? If not, check they're tight as that hissing noise could be one about to make a bid for freedom.

Yeah they need the guts ripping out of the inside of the rack mate.

Try removing the loop pipe or making up 2 separate pipes that are open to atmosphere. It could be hydraulic pressure building up.

@DCELEC 182 runs them on his so I'm sure he will be happy to share.

Yep it's a well documented trophy on here and Clio trophy.

I'm on vibratechnics mounts mate and I rate them tbh. No experience of the pms items, but they'll be good as well.

Fast road and occasional track you'll be fine mate on b14's.

Stay safe out there @marinemackay2003 I have nothing but respect for all of our armed forces! :up:

Which one drops it the most? I can never remember tbh! Lol! One of them hardly drops the car at all, so I'm assuming it's a drop you want as well?

If you're on new standard shocks is fit some eibachs or cooksports. When they're knackered I'd replace them with b14's. Only my opinion though!

That's what I'd be changing then mate. Yeah that's the only one I've seen I think?

22 years ago today we lost one of the greatest f1 drivers ever. R.I.P Ayrton Senna.

Has it ever had new injectors mate? That's all full load flat out as well from there. Oh and you turned in too early at bergwerk. Lol! Just reminded me!

How much fuel did you have in the tank mate? And whereabouts on the lap did it misfire?

Flol! Thanks mate. It's definitely getting closer to being useable again. And thanks for the congratulations too. :up:

Cheers mate. Yeah I'm looking forward to meeting our little alien tbh!

I just polish mine with normal car polish everytime I wash it. Yes they do scratch, but if you are careful enough they'll be fine.