Search results

Ph1 172's (089) and some, if not most ph2 172's (129).

In theory any jc5 box should fit, but I'd imagine you need one with a speedo drive? That limits your options and you may be better off fitting a jc5 089 or a 129.

Looks brilliant mate!

The majority of cars have gear oil in them that's never been replaced mate! Most jc5's will need to be topped up as they leak like a sieve at the selector shaft!! The oil replacement/topping up procedure has been covered by @VR46-G@Z

All in good time lover.

It's Mobil 1 Motorsport that I run. But its worth keeping in mind that changing gear oil reasonably regularly is also a must as far as I'm concerned, especially on a track car. The oe spec oils will NOT stand up to track use as the heat breaks them down. Before you know it, you've got a crunchy...

Yeah I'll find them out and fire them over mate.

Had an hour spare this afternoon so I thought I'd do a bit more. Decided to be like this guy: The end result was this:As you can see still a few wires to shorten/add terminals to, but I think there's only about 10 or so left. Then the loom is finished. Another job ticked off the list!! More...

Not that I'm aware of but it could be the case. I still deal with the bloke that was in charge at r sport.

If your feeling brave ring Curtis at Ast and ask for a price. Tell him cash and drive up to collect them. What you after 4100's or 5100's?

Who's that quote come from?

Well I'd quite confidently say there is your issue mate. Either pipe up the compensator valve correctly and try again, or remove it and try the reducers.

Yes mate you do. £12 will give you full access and a very good selection of traders. @George@RTR_Parts can supply you these spacers.

You'd only be able to get one through what used to be R sport at Wimbledon.

I thought you'd done away with the rear compensator??

The coil light is due to it not being connected I imagine. Easiest way to rule that out is to plug it in and make sure it's bolted to the inlet/engine. Can't quite remember if they're earthed through the engine you see - some coil packs are. What wiring have you removed so far? You ideally...

Funnily enough, I need some of that for where the 2 halves of the airbox butt against each other!

They're a 3/8 12 point socket size. A 12 point 10mm socket will do them, but it'll be a bit loose that's all.

It sits under the black plastic of the bumper trim so it'll stay as it is! Lol! Stop zooming in!!

Cheers mate. I know I'm trying. Lack of motivation atm.

Tv kept breaking. Lol

I've had some spare time today, so a bit more progress has been made! First up we have some brake lines. Ordered these off eBay to suit the Meg brembos. It's not quite viper green, but it'll do!! Next on the hit list was the support bracket for the underside of the carbon airbox. No pictures...

Looks like you mean business. Lol

The biggest issue is that most people expect a 30-40hp increase from just the inlet. It's n/a tuning, not boost. These sorts of increases just don't happen with n/a tuning for much below 5k.

I'd not thought of it like that!

@93keith you need to get in touch with @Russ_16v or @Dan@SJM. They are now the sole distributors of the rs2.

Yes I'd be interested if you can do ds1.11 for the 197/225 brembo caliper in the group

Alex told me. Bit of pillow talk. Flol

It is like you my friend. Simple and easy. Lol!! Anyway more to the point, wtf are you doing up at this time?!

Why do people have this obsession with having the peak of a baseball cap straight?? Does it score you cool points or something? No. It scores you c**t points. I watched 15 seconds and his cap had offended me to much to continue.