Search results

If there is promotions on you will either get trade price or promotion price. Cant get trade on promotions. Often the promotion price is near enough the trade price When they do the free screwdriver sets with 5l of oil etc, you either pay full price and get thr screwdrivers or pay trade price...

The jon foz subframes seem to have different mounting holes to others. I ran mirco seats, OMP side mounts and OMP subframe Changed to the jon foz subframe and the side mounts when set as far apart as possible on the subframe holes wouldnt let the seat sit between them. Had to elongatw the holes...

You do get braked ones but unsure how efficient they are as using the cars brakes surely just results in a solid pedal and very little brakes. Have seen them advertised before

Please use the money you save by hiring and buy a set of tyre slings for that straps and do it properly. Servicing a trailer will be the least of your worries when that car moves or shears the wheel when the force is put on the spokes

For reference regarding the turnbuckle, the distance between alternator and block holes when belt is at a decent tension is 190mm. This equates to a 120mm turnbuckle from mcgill motorsport om ebay to give a decent range. I tried their shortest at 70mm before starting the job and nowhere near...

For reference, the distance between alternator and block holes when belt is at a decent tension is 190mm. This equates to a 120mm turnbuckle from mcgill motorsport on ebay to give a decent range. I tried their shortest at 70mm before starting the job and nowhere near, went for a 100mm which...

Solid on top of the gearbox mount aswell. Thought about getting a small holder made for it and mounting it up at the pas bottle area if the loom alloys. Anyone relocated theres to a similar position?

Iv always said an advert tells alot about the car / owner. Cant beat a well written advert, if folk cant be bothered to put 5 minutes effort into writing an advert with some decent information then what does that show about them

I have a plano toolbag which is a decent size and have various hand tools in there. I took stuff out my toolbox in the workshop into there for my first race a few years back and have never put them back. So handy to grab for racing, working on a car at home or different location. All the go to...

Pretty sure there was someone making these up? Failing that any engineering firm should be able to make one up no bothee

Thats one to hold on to! Cant beat a clean and fresh Ph1. Wish Id never made mine into a sprint / hillclimb car years ago and cant believe how the price of them has risen since then

Ach I'll go for it then. Iv a whole year before the cars needed anyway as taken a year out to get some jobs done and finished but list keeps growing haha Got new tie rods and ends sitting spare so fine chance to get them fitted to a dci rack

Isnt it tight as hell and near impossible to remove the pas rack with the subframe still in place?

I just had the subframe dropped a few months ago, wish I had this planned back then and wouldve just swapped out the rack Will loop this one for just now and see how it feels and then change the rack for a dci one in the future at some point

Rs lower inlet fits no problem, just done one on my ph1 end of last year Ph1 has a different breather system too, this may affect the top inlet aswell as the tb pcv and sensor

Anyone running li ion batteries in the passenger seat? I relocated my battery last year to passenger seat and running an odyssey. Will swap to li ion sometime but have heard issues with them being relocated due to length of wire and voltage drop? Dont want to go back to having it in the engine...

I was quite concerned how exposed the posts ib mine were and didnt come with any sort of protection. I just taped them up bit should really stick some heat shrink over them or something What about something like this to save adding in an extra wire? MOTOPOWER MP69011 Battery Quick Release...

Attached now

I did the very same as yourself and used a simple isolator, I used a bulkhead fitting and in the engine bay it goes ; Bulkhead fitting - isolator - junction box - fuse box Have attached a pic that I found, bracket mounting isnt the neatest but I was kinda hurried at the time and its turned into...

Had a V2 sport for a few years, just expired this year. Couldnt fault it Just bought a 2nd hand hedtec to see me through till 2023 as didnt see the point buying new to only replace again and get 3 years racing from it. Read some good things online about them so nice to see how it compares to the...

Can see what you mean there, just added a spacer to keep it parallel and inline Will get one ordered up anyway and fit it at the same time. Cheers for the info

Just been through the big epas thread and seen the turnbuckle there on the last page. Dont suppose you can remember the size of the turnbuckle required?

Perfect, thanks for that. Looks much neater with the turnbuckle, is that what you have fitted? Where did you get it from? Install looks great with all fresh bolts etc! Iv a cambelt due before next years racing so going to sort out the pas delete before it goes for cambelt and then get it rebuilt...

What belt did you use with your setup and did you go ahead with routing it like the pic you posted? Any problems with it? Iv currently got a pms as delete (original one) and going to change to a cup setup aswell as removing pas. Want to minimise the amount of pulleys so dont want to run the one...

Few have said its even worse with a gripper diff fitted which Im planning later along the line so thought best to have epas as a backup

Can the epas setup be used on any rack or is it best to use it on a non pas rack? Thoughts was to remove pas and loop my current rack (Ph1 172) and see how it goes. If I dont like the feel then add in the epas column etc to the rack. Would this work and anyone done it the same way?

Email safety devices and see if they have any used cages coming into stock They changed the design of the full cage for clios and they were exchanging them for anyone who had the old style. Cages were then inspected and sold on, often listed on their website. I got a full cage for £360

Sorted! £68 in total Sent from my iPhone using Tapatalk

3 out of 4 of mine were ok just last month and that was on a 120k mile Ph1, thought if I put on fresh ones with some copper grease they would be ok for a fair while Apologies, cant find the photo I had of the part numbers anywhere Sent from my iPhone using Tapatalk

Got all part numbers here for bolts, nuts and cages. Comes in at around £70