Search results

Replied on C16V mate

They're anthercite lol

Looking good, black suits it - Just lol at the name of the tyre though!

The weight of them makes baby jesus cry :( You better fit 30 profile tyres to counteract the weight lol.

Re: Mk1 F4R/172'd Track Car Project Very much so! ..........but towards the end of last year I had a good few months where it was perfect without a problem - was worth everything then! Knows :evil: Not really, I was going to get one to do some Diag but its running now so dont need :(...

Hes booking Rockingham on the 14th June, lol. Engines back in but plenty to do now!

EVERYTHINGs going up in f*cking price, I paid under £90 last year from Fred IIRC lol!

He was still around on here moaning in every Mk1 thread until a few weeks back under a different name, lol.

Sounds like Sofaboy on here

Re: Mk1 F4R/172'd Track Car Project Cheers! Well the knockings got worse :( - new CV or Shaft time I think!

Everythings on the grandstand side again this year Ad...only people in the paddock are the ones that are on the FCS track-time that go through the 'drive in' tunnel... Talk about eventful with the filler cap, didnt know you were on about that last night lol. BTW any Mk1 cap will fit and work...

Car sounds great - wish I had known it was on im only a few mins down the road from Three Sisters!

If the car is setup incorrectly and the person has no idea how to setup tyre pressures - yes. Otherwise they are fine on track, quite a few of us used them over 4-5 trackdays (Oulton, Brands, Cadwell x 2) and still had life left in them - and thats driving them HARD. They are a budget tyre...

Id say new shaft too - a lot less hassle! My tripod thing had a circlip then just tapped it off gently, came off really easy. 172 shaft though so probably different.

Yours must be ABS based then :( It could be entirely possible to fit a Cup box, along with the speedo sensor - and then get the wire that usually goes to the ABS system for the speed reading and put it onto the speedo sensor instead. I dont see why Renault would change the fomat of the signal...

Depends if your car currently gets its speed reading from the back of the gearbox, or the ABS system... Check on the back of the box and see if you have a speedo sensor plugged in, near the exhaust manifold... Seems Renault were pretty random when fitting the 172 Ph2s out with the types of Speedo

Aye thats Bloooor, or BIG Oor

My JB3 did 4/5 trackdays with the diff whining to f*ck, then the circlip popped at Mallory. It would probably do the same amount again without any issue I rekon if I could be bothered fixing it!

The bottom end he bought didnt have a dipstick tube - when we went to fit one of my spares we realised whoever had the bottom end must have snapped the old one off, as there was still part of it stuck in the hole... Couldnt get it out so Adam took the engine out, removed the sump and removed...

Possibly end of october with EasyTrack when they confirm the date... I spoke to someone at EasyTrack late Friday afternoon on the phone and there were still places available...

Better check with EasyTrack if there are any places left first, I would imagine there are a few left

Yeah... Just put the jack on the beam in the middle underneath and raise it up lol

Might pop up - not sure yet. F*ck going to Warrington, been there done that many a time and im bored of all the chavs, lol.

There probably is some way of caluclating it but its easy enough to pop them back out and adjust it slightly if you get it wrong... Cover the splines in copper grease once you get them out (might be a tough job if they havent been out in a while) so you can easily adjust if need be

Is that Cadwell I spot Jay? You need to go again tbh.... *cough* 7th July *cough* ;)

Easy.... Get the back on axle stands near the rear beam mounts - then take the weight of the rear beam in the middle on a jack... Pop the caps off, put a 30mm socket over the end of the torsion bar with a long M10 bolt through the middle. Put a washer and nut onto the bolt and tighten it...

How manys going Mike? Dont know if to pop up or not hmmmm

Re: Mk1 F4R/172'd Track Car Project Yeah....so its gotta be the CV thats fucked then, good 10mm of movement in the shaft going in and out of it! FFS.