ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Search results

  1. D1CKY

    I was gonna clay my car tomorrow and i have a few questions

    Me again Lol :rasp: Could i buy this minstead of Jeffs Acrylic Trigger ? JEFFS Werkstatt Acrylic Glos http://www.polishedbliss.co.uk/acatalog/jeffs-werkstatt-acrylic-glos-maintain.html Or is it just a Detailing spray for in between after using the Jeffs Acrylic Trigger ?
  2. D1CKY

    I was gonna clay my car tomorrow and i have a few questions

    Thats what i thought "Detailer" ;) Cheers mate :) Does anyone have any clay recomendations ? I was gonna try the Megs Smooth Clay Kit ;) http://www.halfords.com/webapp/wcs/s...egoryId_123054 Unless Polished Bliss have better Clays i can buy over the Megs Smooth Surface Kit ...
  3. D1CKY

    I was gonna clay my car tomorrow and i have a few questions

    But won't it look better after i wash it and go over it with AG SRP ? And what clay do you use Ali ? And where from ?
  4. D1CKY

    I was gonna clay my car tomorrow and i have a few questions

    Cheers boys, i thought i read on here somewhere about softening the clay in water :eek: Ah well :S
  5. D1CKY

    I was gonna clay my car tomorrow and i have a few questions

    Just a quick few questions here. I was gonna have a go at claying my car tomorrow if the weather stays good :) http://www.bbc.co.uk/weather/5day.shtml?uk=14 The way i was gonna do it is. Rinse the car with Karcher Foam the car up with snow foam and allow to dwell for a few minutes...
  6. D1CKY

    MG ZR160 V Clio Sport 172

    At the end of the day its a Rover with an add/clipped on bodykit :( And rovers are usually associated with old pensioners etc and they rust (well they used to) and are common to blowing head gaskets :S And what would you rather have a Mg Zr or an Rs Clio ? I may be close but i know what...
  7. D1CKY

    engine corrosion

    Looks not bad, how long did that take you ?
  8. D1CKY

    Security Pedal Clamp Lock

    Looks a not bad idea ;) But wouldn't more people look at it if you can get it insurance approved by someone like Thatcham ? Then ou can sell it as being insurance approved etc etc. Or will that cost too much ? P.s Whats with you floor mats ? They look a bit chav :(
  9. D1CKY

    Help!!! need a Gearbox

    He's trying to say there as strong as butter i think. :S Lol :D
  10. D1CKY

    Got rear ended today

    Get the BMC Removed man and even the Silicone Hoses(they may be classed as modificaton) :( And hope he isn't a c**k and says painting you Turini's is a mod, as they aint the standard colour :(
  11. D1CKY

    Got rear ended today

    I guess someone has to pay for all those insurance claims in the Glocester flooding last year :( It'll probably affect most people:(
  12. D1CKY

    Got rear ended today

    Thats what i thought, unless you've paid slightly more on top of your premium to help pay towards a Gti courtesy car ;) And its pot luck usually as said above :( Its cheaper for them to give you a 1.0 or 1.2 than a Gti ;)
  13. D1CKY

    Claiming for Steering wheel on Warranty

    Try it, and let us know what happens ;) As some or most may be c***s and say its wear and tear :(
  14. D1CKY

    ITG panel filter

    Good question ;)
  15. D1CKY

    ITG Panel Filter Vs Carbon Airbox - Which should i fit ?

    Ok i will do bud ;) But i know the o.d (outside diameter) of outlet pipe on the carbon filter has the same i.d (inside diameter) as my Samco hose from K Tec as it slides on airbox a treat(well they aint both the same measurements as the airbox outlet is a ball hair smaller o.d wise to allow...
  16. D1CKY

    ITG panel filter

    Thats a fair bit aint it for a standard airbox ? :S
  17. D1CKY

    ITG Panel Filter Vs Carbon Airbox - Which should i fit ?

    Aren't these filters the same, its just the air feeds/hoses that are different ? :S I was gonna use my Samco Bend as its the same size ;) I'd just need new Caf Ducting
  18. D1CKY

    ITG Panel Filter Vs Carbon Airbox - Which should i fit ?

    The reason i'm wandering if i'll gain anything i because when i had it on my Polo Gti (It was meant to be 125bhp as standard, and with just the Carbon Fibre Airbox and the Decatted Powerflow Stainless steel exhaust sytem it made 138bhp on the rollers) Not bad increase i thought for a filter...
  19. D1CKY

    Do any Clios or other Renaults have hollow drive shafts?

    What about 172/182's Are they hollow or solid ?
  20. D1CKY

    New inlet elbow,breather and ITG panel

    I had a oil breather on my lastcar (2000 polo gti) and thats all i could smell from the inside of the car (oil fumes) :( It also leave a film of oil over everything around about it :(
  21. D1CKY

    ITG Panel Filter Vs Carbon Airbox - Which should i fit ?

    At the moment i have a ITG Panel Filter in my standard Airbox with a lower grill air feed and a Black 90 degree Samco Bend. I have came across a Cf Airbox in my shed off of one of my old cars. Should i fit it ? Will i gain anything over the setup i have ? Excuse the K & N Sticker, i...
  22. D1CKY

    Got rear ended today

    I wasn't gonna post this but f**k it, i agree with Darren here i'm afraid :) Why jump in with a reply when you don't know the true details :(
  23. D1CKY

    Got rear ended today

    I'm 25 and i'm £300 and something Fully Comp with 4yrs Ncb:( f**k paying more than a grand to insure a car :( :nono:
  24. D1CKY

    Got rear ended today

    I did wander with the price of the quote from the Bodyshop :S Who you insured with ? I thought thay'd just give you a gay little 1 litre run about as a courtesy car ? Or didi you pay more for a courtesy car of the same power
Top