Search results

Ok cheers man

Lol :D

Meaning ?

I was just wanting to take that out (the pressure switch), put a t piece in its place so i can refit it (the pressure switch) and attach the elsectronic oil pressure sensor for my oil pressure gauge to the t piece. And voila one working oil pressure gauge :) Would that work ? And if the...

This may sound silly, but what is a knock sensor for ? :S As i found my knock sensor whilst on the look out for my oil pressure sensor and oil level sensor http://www.cliosport.net/forum/showthread.php?t=322832

Ok cheers mate ;) Don't supose you know if the oil pressure sensor is the one for low oil pressure or high oil pressure ? As i disconnected the multiplug connector then started the engine to see if the oil light came on on my dashboard and it didn't. :S And has the oil level sensor got a...

What are these sensors/senders for ? ? I have a few pictures of sensors/senders below. Does anyone know which is which ? Is this the Knock Sensor ? (It has a brown coloured bit on it - and it has two wires going into its multi plug connector ) Is this th Oil pressure sensor ? (It has a...

I have asked this before with no luck... I have a oilemperature gauge and an oil pressure gauge to fit to my car. I have ordered and received a sandwich plate and it is of no use http://www.cliosport.net/forum/showthread.php?t=227874&page=2&highlight=oil+pressure So i was wandering if...

Bump, does anyone know where the oil pressure switch is ? Is it the sensor with the wire going into it and has green on it ? And does anyone know where the oil level sensor is ? The reason i'm asking, the sandwich plate i bought will fit in place but the m20 - 1x5 male female adaptor they...

Is it ? I thought it'd understerr like f**k at a corner:(

Ok cheers guys :)

Cheers bud, so its a case of. Ignition off. Go round each caliper opening the bleed nipples on each in the order stated in that link till all the brake fluid comes out with no air (with someone pumping brake pedal) making sure not to run reservoir dry. Whats the bit bout the pedal travel...

I do like to have the odd hammer around the back roads. Aint done a track day though (as i have an FF and it'd be a waste of time) :(

Next question what paint did you's guys use ? And did you's need to key/rub them down in between coats ? And did you's use primer and lacquer ?

Re: Bleeding Brakes Questions and do i have to do it different way if i have ABS ? My car has ABS as its a 172 FF, what issues/problems would that cause me :S Does anyone know what way i'm meant to bleed my car if it has ABS ?

I was wandering is it possible to remove tar spots without having to polish and rewax the car ? As i have just clayed,polished and waxed my car not long ago. I have AG Tar Remover and Autosmart Tardis Tar/Glue Remover which are great but don't want to use them if i can help it, as i'll have...

Lol :D It took me just over an hour or so, i left the car wet after washing and used a mixture of Duragloss 901 and water in a spray bottle for lube ;) Then washed again. But i have a few tar spots now :(

Cheers guys ;)

Sorry if this has been posted before, i'm looking into getting braided brake hoses http://www.cliosport.net/forum/showthread.php?t=321173 This would involve removing my standard rubber ones obviously and bleed the brakes after fitting of the braided ones. I have never bled brakes before :(...

Anyone got pics ? And i guess its a case of apply with a cloth and buff off ?

Ok cheers guys. How easy are they to change ? Just a case of off with old and on with new ? And can i use a normal spanner ? Or does it have to be a brake one ? And any tips on bleeding them ? Is it a case of working from the caliper furthest away from the brake fluid reservoir and...

I am wandering if i should put braided hoses on my 172FF ? My setup at the moment is Front. EBC Greenstuff pads Brembo Max Discs Rear Standard Pads Standard discs Is it really that big an improvement on the brakes ? And where is the best place to get them ? Ktec ? Or are there any...

Very nice mate. You had a bit of a result there ;) You've landed with a newer car than you had ;)

I'll agree with you there bud, it is great stuff ;) Thats the car all done, i used. As Tardis, The Megs Smooth Surface Clay Kit, Washed with Duragloss 901 and sheepskin wash mitt and dried with Sonus Blue drying towel c/w Qd, SRP, Jeffs Acrylic Jett x2, Collinittes 476 x2, Pboys Wheels...

Ok, cheers. I was gonna use Autosmart tardis if needed ;)

Anything else i should be aware of claying? Or i'll just go for it ?

I'm winding ya up :rasp:

So its true what i've heard is it ? Lol :rasp:

Ok cheers mate, i'll do it that way if it saves me drying car ;)

Ok cheers Rich. If i was gonna use a mixture of duragloss shampoo and water in a spray bottle, how much should i use when mixing it up ?