Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
ive still got a couple of days work on mine doing the sound deadening and the boot build. you should be able to do it in 2 days though if you are not building anything in the boot.
i thought oright ill just pull the seats out easy peasy. could not be bothered doing them in the end. as long as your cables are not touching and they have a decent distance between them. it should be fine i think.
if you run the power cable down the middle of the car you will need to take the carpet up, which will mean u need to take the seat or seats out. under the carpet is a think foam like underlay so i suppose you could cut a groove in that an run the cable in it so it won't be as much of a bump.
mines 4 awg and it was a b*****d to get through the bonnet release grommit. what i ended up doing is pulling the grommit though into the foot well then cutting it slightly so its big enough to take the cable, then pass the cable through from the engine bay and through the grommit then put the...
no they are all hidden behind the trims running down the sides of the car, what i ment was the speaker cable is just tucked under the carpet and the power cable is in the trim so they are about 10cm apart from each other. i dont think i will get any interferance from that distance so it should...
ive been doing my wiring the last two days,
was going to take the carpet up but you have to take the seats out which is a mission.
ive got 2 sets of rca and a speaker wire going down right side, and power and rem going down the left side. the speaker wire to the left hand door i have just...
i took my dash of this morning to fit my tweeters. got the dash off then realised the airbag was there and i was like whoops i should have disconnected the battery though. it was fine. if you want to just spin off the positive terminal and pull the wires off. leave for 20mins then take the dash off.
are you running the speaker cables for the front doors? how are you getting the wires through the grommit into the door are you drilling the plastic part of using the screw holes to get the wire through? still unsure on how im going to get mine through as the cables are quite chunky
can you clean this out once you sprayed it in? and get the puncture repaired if its in the middle two thirds of the tread. or do you need to get a new tyre?
i could feel the heatshield for the exhaust but that was it. ill jack it up and get under thier. cheers paul. im running wiring too sean its a b*****d isnt it
need to remove my front seats on my mk2 ph1. i can see the two grommits under the car just behind the sills. im assuming there is another two further under the car but i cant see them? how many in total?
started doing the wiring on mine tonight, got lots to do and ive got some days off work so im going to crack on. sound deadening, mdf baffles, removing dash for tweeters, building a new install for the amp and the sub in the boot. loads i dont know where to begin