Search results

mine was in the next bay to it, nice car :eek:

whats the best way of going about this? would like to do it in the least bodge way as possible.. only thing i can really think of so far is mesh behind it then build the hole up with fibreglass somehow? any tips? cheers

anything common on these causing a hesitation from low revs? checked all the loom all seems ok, has had a new map sensor on it recently came up with the following fault codes - fuel circuit pre cat lambda sensor signal put it on the gas anyliser its running lean (co-0 hc-1 lambda 1.03)...

how much am i looking at on average? i've been weighing up all the pros and cons of what to do with my 1.2 thought an engine conversion (too much hassle trying to source parts etc), thought about just selling it and getting a ph1 (prefer the ph2 shape, and mine is white so it will be quite a...

Is this anybody from this site? i wont say anymore than lowshoe lane as if its you you will know where i mean. been clios outside your house since i was a nipper first i think was a williams (years ago) couple of 172's and 182's one silver one liquid yellow i think. now a 197? i live round the...

i recently bought a pattern wing from ebay (amazed at how well it fits by the way-with a lot of fiddling all the gaps are perfect) and due to the fact i couldnt be without my car to have it painted on the car, i gave the wing and the paintcode to the paintshop next door to the garage a work at...

Right i had a problem with a coolant temp sensor on my 1.2 16v which i replaced, and tonight after work i plugged the scanner in to delete the code it left. On going in to engine management it came up with the following faults.. 1 brake pedal A/B comparison (which cleared its self as soon as i...

Had a quick check over of my car thismorning after my car developed some unusual handling charecteristics and found both front shocks leaking. i've got eibach springs on the car which obviously are lowered slightly so im wondering if i should be looking at some better shocks. not interested in...

what exactly would be needed for this conversion? where would i stand with the 1. gearbox- can i use the 1.2 box or will i need the 1.6 2. mounts- obv i will need the 1.6 o/s mount but other side depends on box? 3. management- will i need the 1.6 set up or can i run it on the 1.2 ecu? subframe...

Had a little knock on the n/s/f of my clio a little while ago,, and since that going in a straight line the steering is a little left hand down- straighten it up the car goes right. if you take your hands of the wheel the wheel will sit a little left hand down but it still accelerates dead...

Anybody be able to look it up for me?need to order one up! unless somebody has one laying about? cheers

numberplate something like that, silver 182 sware i've seen your car/name on here before, you drove past me getting in to my car on white hart lane nice motor ;)

how much am i looking at to get my 1.2 16v cam reprofiled to a fast road kind of spec? and where would i go about getting it done, i suppose i could enquire at the usual cam manufacturers but they would need what specs i want surely? i know a few people on here have had it done so any info would...

from ultraleds.com ive just received them and i sware you can just about see the things they are tiny, i kind of took a guess at which ones i needed as its the only site that take the card i wanted to pay with can anybody tell me if these are in fact correct...

right im a bit undecided as to how i can do this, my headunit has 2 sets of preouts, a sub out and a front out at the moment i have a sub connected to the sub output (i like this because i can turn off/controll the sub through the headunit) i want to put a second amp in to run the front...

anybody know if you can get them, i mean the xenon bulb type things not proper xenons ;) cheers

Well i've had this magnex backbox laying around for ages it was in fairly good condition other than the last person that removed it cut it off about half inch from the backbox (and the minor fact its actually for a fiesta rs turbo) but me being me thought i'd have a crack at fitting it last...

Have had a good search about and found loads of threads on the dash conversion but none on actually changing the colour of the upper bit of the trip computer dash,, is it doable and could anybody do me a favour and let me know exactly what i need to buy to do the conversion, going to buy the...

right, my 1.2 16v is getting ready for its cambelt change soon and the other night i had it up on the ramp and ive noticed the head gasket is leaking oil (i know they all do but it seems a bit much). out of curiosity really and because i have the facilitys to do so im wondering what i can get...

basically after a bit of a homemade rear box for the clio, ive got a magnex ss backbox from a fiesta turbo laying about that im thinking of doing something with,, ideally what i want do do is cut the tailpipe off and weld it to the original box (and cut the bumper to fit it) what i want to know...

anybody have any tricks to stop a sub box sliding around in the boot? every time i chuck it round a corner a bit enthusiasticly the sub goes walkabouts, theres not really alot to anchor the thing to in the boot and im thinking if i just velcro it down it will just slide the boot floor cover...

For a 1.2 16v, dont want anything over the top looking and want to pay somewhere around the 200-250 mark looking at the ktec ones (mainly because thats all i can find) which look to be fairly subtle, i want to releive the bumper a bit to set the tailpipe in the bumber but dont know if i will be...

Right, would like to change my front components on my 1.2 16v 04 what i to have everything mounted as it was standard, i've been told that 13cm speakers fit straight in and i want the tweeters in the original dash locations, i can hid the Xover under the dash somewhere im sure what i want is...

Right, first off i did see the other immobiliser thread but that one started off on kind of the wrong foot so thought i would ask in a new one. The problem i have is i want to fit a clifford remote start/alarm/imobiliser to my 04 1.2 16v, problem that leaves me with is i cant remote start with...

Hi, great forum ive just stumbled across here,, have a few questions for you if you dont mind. I have a 04 plate 1.2 dynamique and would like to fit the rear disc setup from the likes of a 172 or similar (mainly for looks :( ) what exactly would i need for the conversion other than the obvious...