Search results

Are they 15 or 16 inch? If they are 15, they will definitely need spacers.

I can measure them for you tomorrow on mine, take some photos. What wheels are they? I may be able to tell you straight away if they'll fit or not... :smile:

Yeah, I'm keen. :)

Errr....the gearbox is probably the weakest part of a 197. Why would you want to put it into a 1*2. For the money, better off putting a VAG 02M six speed box in, as a few off here have. Why do you want to swap the gearbox out of interest?

51 plate it's likely to be a gearbox speedo sensor. Not sure how the loom is different, but yep I removed the ABS.

Hi, Two parts to your question. First part, if you want a steering wheel, please start a thread in the "wanted" forum. Second part, regarding what looks good, in terms of an aftermarket steering wheel, then most plump for a 330mm OMP trecento or similar. Standard, then people get a bespoke...

Depends which ph2 mate. Early ones and cup ones run off the speedo sensor in the gearbox. Mine does for example. And if you remove the ABS, I believe the speedo doesn't work as I looked into this when I did the ABS removal on mine.

If all of your wheel bearings are shagged, then yes, you'll get wheel wobble. Swap out the bearings first. Then if you still have wheel wobble it is down to the wheels / fitment of the wheels on the hubs and you'll need to start troubleshooting. But first, do the bearings if they're goosed...

Nope. Will all be swapped. Except camber bolts. If you're running any. You need to keep those :)

Looking great. Haven't caught up with this for a while. I'll change the title for you ;) x

Don't get me wrong bud, it looks great and sounds in top shape mechanically. The 289 needs about £30k put into it to get it up to 400bhp. The standard ones were 190ish bhp when they left the factory. The high power ones (big money for an original hiPo block) were 270ish. There is a 400bhp FIA...

Only just seen this. It's the Caged one sold by k-tec. You can get it direct from Caged as well.

Looks lovely. Not wishing to be a party pooper but it's highly unlikely to be putting out 400bhp. Epic car though.

@masekwm Decent coilovers, PMS top mounts and strut brace kit will be significantly better on track than springs. Good move with the diff. Best mod on mine to date IMO. On road, depends how hard you push it on the road tbh man.

Not with the rust issues. 😂 Ph2 for champions..... X

Probably not mate. When you go to coilovers (if you plan to), I'd do it then. It's a great piece of kit, but the benefits are increased if everything else is "upgraded" or "tighter".

Afterwards bud. Improvements; - sharper steering - reduced play and "tighter feel". - less flex Although, that is with the brace in addition to the top mounts. Downsides - harsher ride In truth, the benefits are only slightly noticeable on the billies. The stiffer you go with everything geo...

@masekwm I'm currently running them with the PMS kit. Works nicely as a package, and I'd recommend them.

PMS shifter bud. :) http://www.pure-motorsport.co.uk/details.php?itemid=197&model=5