Search results

I was going by what couzens had said, that he had pressed the button and it has lit up on the dash, meaning that he has that part of it present.. There should be a plug behind the passenger side of the bumper to allow him to take power down to each fog light. (either by using the loom from...

the main loom plugs into the loom on the bumper at the passenger side, behind the bumper.. You will likely have to buy the loom to fit to the bumper, or if your handy with wiring you could hook the fog lights up to the plug (behind the bumper) relatively easily..

Re: Calling All Silver Clio's mine...

thats what I was led to believe, but someone stated it wasnt.. Cheers for clearing it up.. :D

cup doesnt have air con, leather/alacantra tho?.. This has the cup suspension (60mm hole distance), cup splitter, cup spoiler, air con, xenons, cruise, leather/alacantra seats.. etc.. Does that make it a version with both cup packs or something then?.. Cheers folks..

Few pics after a bit of lowerage and few layers of wax, from the brother.. Cheers, Darren...

Cheers folks, yeh the green seems to work well with the colour... Dont think it would be better than standard, but it does give a nicer note from it! And its certainly better than the open filter that was on it previously.. lol Thats pretty cheap for the V6 airbox.. is anything else...

Well folks, few wee changes in the last month.. Got myself a Simota Aeroform Induction kit, (nice note from it) and decided to paint it something to contrast in the engine bay.. Went for kawasaki green, some of you may not like, but its my car and I do.. :rasp: Also had some left over so...

Cheers mate.. Your cars looking well, like the wheels too... ;) If your there on sun we can get a few pics as im 95% going to be there... :)

Yes mate should be there, many making it along?...

Cars looking well trev... Will have to get a nosey at the next meet up.. Darren...

Cheers.. The fella that bought the valver is an enthusiast, and is going to probably spend another fortune on it, so may see it about yet..

Cheers, must get some oredered up... :)

aye its def not been hit or anything, as ive had bumper off when doing the aux and timing belts and it was 100%... Were would i get a part number for these stickers? as i know if i go to renault they arent going to have a clue what they are...

Ahh yes, just noticed these when I had a look at a photo of another... Didnt ever notice these before, bet renault charge about £15+ vat for these or sumit... :eek:

Bumper stickers?.. What type?.. and were does it look like its had paint?.. Darren...

Cheers people, have a simota induction kit ordered for it, so will see how that sounds when it arives... :evil:

Id like it to sit 20-30mm lower than it does now, maby no point going for 30mm springs then, will 40mm springs, show some difference?.. Or am I going to have to get saving for coilovers... :eek: Anyone have any pics with a 182 on these 40mm apex springs?... Cheers folks...

Cheers, yeh lowering is on the cards.. Does lowering with springs, (say 30mm) affect the handling much?.. And what springs are the best to go for?... Cheers people...

Cheers mate, the valver has went to another enthusiast that will take care of it, just like myself, so I was happy about that...

RS 182 - Titan Grey Well folks, the Mk1 Clio went about a month back to another enthusiast, (who is going to spend another fortune on it, like myself)... :P Pics of the last one here: http://www.cliosport.net/forum/showthread.php?t=238649&page=3&highlight=carmen And its replacement (at just...

the valver had a rear arch/quarter panel replaced under waranty from renault, due to corosion, which was painted, but that was back in 1997, both arches are starting to go again, so i will probably treat it to a full exterior respray at some stage, in the near future!, but the only paint the...

Going to take a few tomorrow, if the weathers anyway half decent! And he wont be coming along :mad: Cheers people, and maby see some of yous at the AI Autosport RR day on Sunday :)

Cheers, Yea I know how you mean, the black OZ's were great when the car wasnt moving and when they were shiney and clean, otherwise they just looked like steels when the car was moving. The turbines seem to look 'bigger' with them being silver also. Was thinking of a dark anthracite colour...

Cheers nope, went out with the mate and brother, for a few photos but brother refused to get out of the car for me to take a couple of photos, the wee s**t :mad: :approve: makes the car look uneven if anything, needless to say I was a little unhappy!

Re: Ph 1 Valver - Carmen Red UPDATE Well folks, bit of an update, after nearly a year :rasp: finally got round to getting a few pics... Managed to get hold of a mint set of TURbines, and had them fitted for a month or two, (they are extremely rare to come by over here in Ireland, as are...

Cheers peeps :o they have already been sold on, got myself a real mint set of ph1 turbines! so ill see if I can sort a few pics, also taking it on track next saturday so probably some pics from that aswel!

cheers, yea its from http://www.carbonmods.co.uk/ real good quality too!

Cheers for the +ive comments guys and gals. Plans now are to modify my dials, get some turbines sorted, couple of parking dents on the doors, and one on the bonnet to sort from a stone. Its had the engine rebuilt, by the previous owner, before i bought it, but it only had OEM parts replaced/...

Ive replaced the header tank since then aswell as some new fog lights, cheers peeps