Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I have a RS Tuning remapped 172 cup ecu, uch and ignition barrel off my old car.
Now driving a ph1 172 and was wondering would above items be a straight swap for existing parts?
Anything else to consider or not compatible?
Cheers
As above I've just started to get a small build up of coolant there.
My cars stripped out and can see its coming from the side of the heater matrix.
I've had a quick nosey under the bonnet and topped coolant up until I get chance to have a better look on Saturday.
Any known faults or...
Symptoms are ABS kicks in under 'heavy' baking at junctions etc. and ABS light is on dash.
I'm guessing ABS sensor. I've had it plugged into an RS Tuner which isn't showing any faults. I've had the wheels off and inspected sensors/wires for breaks etc.
Is there an easy way of eliminating...
As above. Car looked nice wondered if you were on here as seen you a few times now.
I was in the dirty black ph1.
If so did you see the Nissan Skyline at the side of the road who's bonnet catch had failed? :eek:
I've managed to persuade the painter where I work to respray my car for free if I do all the prep work myself.
I'll be starting this tomorrow. Just wondering what's the best way to remove the rear quater and rear windows?
Is it just a matter of stanley knife and replace seals when refitting...
As above. I'm currently fitting a ph1 front end to my ph2 cup.
Wiring harnesses for the headlights are different. I have the ph1 harness to cut and join to my current ph2 one.
Just hoping someone may have some diagrams/help to offer me as electrics aren't my strong point.
Thanks.
I'm just in the process of refurbing some hubs as one of mine is worn where the ball joint goes.
I'm going to shotblast, paint and fit new bearings.
Is it possible to seperate the swivel hub from the other hub? I'm no mechanic but like to have a go so want to get clued up before attempting...
Inferno sporting black alloys with silver lip and aftermarket rear lights. Greystones roundabout you turned into Lazenby. I was in my cup riding high on standard suspension and 15's after removing my coilovers:o
Arctic blue 182 going past Fox and Hounds, Slapewath. Car looked very clean, low...
I'm currently in the market for 4 of the above tyres. Been running 15's but going back to 16's and finding tyres a little harder to source.
Anybody know of any good deals at the moment? I'm fancying PE2/3's but considering hankook, continental etc.
I have searched and found a costco deal on...
Just fitted new coilpack, plugs and ht leads.
Car now idles at 2k and won't rev. Have I fitted the ht leads incorrectly?
Can some one please let me know numbers 1,2,3,4 from N/S-O/S please.
Thanks
I've had my car plugged into an RStuner and these are the faults;
ECM rear 02 heater fault (memory)
ECM rear 02 heater fault on activation (present)
ECM electronic throttle control limit aquired (not a fault) (present)
I run a decat so only one lambda sensor. So I've replaced the lambda...
Hi, I'm currently half way through changing my OS CV boot.
I can't see how I'm supposed to seperate the CV joint to remove the 'stub axle bit' to allow me to fit the new boot. Can anyone point me in the right direction please?
Also do I need specialist tools to put the new clips on or is...
Been down to York today for a bit of 1/4 miling. My car was a bit sputtery/choked on the way down but put it down to being cold. Once warmed up everything was fine.
Got a few runs in then queing up to go back down it was really spluttery and felt like it was going to cut out. Very flat when...
I've recently painted 2 Oz F1's white and fitted some baldy Paradas to them for 1/4 mile racing this year to save my road tyres.
Obviously they won't be staying on but I quite like them and have another 2 to paint so I'll be doing the full set white so I have the option of white and matt...
As above I've recently relocated battery and doesn't seem so keen to start on certain occasions now.
I used 16mm proper battery cable to run the length of the car. Is this heavy duty enough?
I've also put a mega fuse next to the battery. Initially I used 200 amp and had problems starting. So...
Just developed this over the last 2 weeks.
Basically when coming to a junction/stop if I pump the brake pedal on/off it knocks everytime. If I'm gentle on the pedal and smoothly depress it doesn't.
I've removed my ns strut and checked the top mount and they seemed worn (60k) so replaced...
You passed me entering Guisbrorough from Redcar way.
I was on my bicycle on my way to work.
Car sounded and looked real nice. White wheels aswell I think.
As above, low reserve on it. Well spec'd Clio.
As said in the advert I have plenty more pictures if needed. Viewing available any time.
http://cgi.ebay.co.uk/2007-RENAULT-CLIO-RIP-CURL-16V-BLUE-/290528648812?pt=Automobiles_UK&hash=item43a4db5e6c
I met up with Pete (Lindleyp) at my work today to do a few jobs on our cars.
I was fitting my AST's recently purchased from DannyR. Pete was doing some jobs off his anal to do list he has on his mobile.;) Most of which consisted of removing things!
Not the best pics from me tbh. Just a few...