Search results

Can anyone help me out with VMWorkstation 9? I am having a problem with getting NAt to work. My host machine is on 172.16.200.0 255.255.255.0 network and I need to setup my virtuals on a 192.168.10.0 255.255.255.0 network but I need them to have internet access. I setup nat on the vm machine...

I was reading the fault codes stored on the car with an RStuner and thought i would look at some live data, so with it still connected to the car i went to start the engine. It turned over a few times and then just stopped. The stop light came on and that was it. Does anyone know how to get out...

I have finally got round to sorting the front of the car out, the old has gone and the new has been applied and thanks goes to Fancy Plates for making the plate. Before: Durring: After: I am slowly getting her back to her former glory. ​

The question is are these "performance" throttle body's any good? I have seen numerous offers for them but none of them have any proof to backup their claims. I am not talking about throttle bodies I talking about just swapping the standard one with one of these...

I have been trying to find the locations of the bolts that hold the front seats in but not for looking I can not find them all. The ones near the out side edge of the car are under the rubber grommets but the inner ones are eluding me. Can anyone give me some markers or pointer to where to look...

Is it possible to put the headlight bulb in the wrong way round? As the car failed the MOT on the Nearside headlight aim too low and the guy at the garage said he could not raise it. Of course I changed the bulbs to Nightbreakers some weeks ago.

Can anyone tell me the size of the socket i will need to remove the rear brake discs? Is there anything I should watch out for when changing the discs as I am not super experienced with the spanners. Thanks

My 182 just failed the mot due to high HCs, it has a after market air intake and a ktec exhaust system the ecu is running a rs tuner 98 Ron map. What do I need to do to get it through the emissions test?

I noticed today that when I was reversing and had the wheel turned on full lock there was some sort of movement. It felt like something was skipping when I was going backwards. Does anyone have any ideas what it could be or where I should start to look? Thanks

Whats the best way to attach a new front number plate on a 182? Was thinking it was some sort of double sided tape but not sure what to use.

Can any tell me the length and diameter of the breather that connects to the air intake on a 182. I am going to change the current filter and induction kit but the pipe to the throttle body has the breather pipe as a moulded part. Thanks

I was looking around the web for ideas for a new headunit and came across this http://www.wedodigital.co.uk/product/2087/meos-7-lcd-1-din-multimedia-console-dvd-bluetooth-navigation/meos-mc701bnav/ Has anyone owned or know much about these, if so are they reliable and any good. Thanks

After a night of excessive drinking I stayed at a hotel for the night. Anyway when I got into the car to leave I had to turn out of a tight parking space so had the car a full lock to the right as I pulled away there was a sort of clunking noise and it felt as if the wheel was skidding as I made...

Whilst driving to work this morning I had a strange noise coming from the front, but it stopped when I turned right. So I am thinking that it is a front wheel bearing that is on its way out. The question is do I replace them as a pair or just the noisey one? From what I have read I belive they...

I am feeling very impressed with myself today, the reason being is that my windscreen washers stopped working about a week or so ago and I have managed to fix them. No big deal I hear you say well it is for someone who is not very good mechanicaly. I purchased a new pump from ebay only to find...

Just to put my mind at rest but is this something I should be concernded about. On my drive home I meet a stretch of Dual Carriage way off a roundabout, so I see this as a the perfect time to give it some. Anyway as I pull hard in the revs in second I get a bit of smoke out the back at around...

Does anyone know of any recaros or that style front seats that can be fitted that still allow then to be folded to give access to the rear seats? I was thinking of maybe some Honda or ford ones but not sure if I can get them to fit.

Well I was up with the birds this morning to change the Pre-Cat sensor on my 182. I had read the guide on here an thought that will only take me an hour to do. Well it took about an hour and a half and was not the most fun you can have on your back. The hardest part of it was getting the wiring...

I have just got my injector cover back from the powder coaters and it looks so much better than the old paint peeling item that was on the car. Just have to bolt it back in place now.

Has anyone fitted these to a 182 and if so do they cause any problems for road use? http://www.primaracing.com/ProductDetails.aspx?pid=33259

If anyone is looking for a cheap in car vido recording device which they can use on the track or for general day to day use have a look at this. http://www.ebuyer.com/267866-xenta-in-car-dvr-camera-with-2-5inch-screen-and-sd-card-slot-xentacardvr01 For only £30.00 you can't go wrong

My drivers side mirror has just stopped working for no apparent reason, the passenger side works fine, my first thought was perhaps they are fused per side but I found that out to be wrong. So before I go tearing things apart does anyone have any places to start looking at?

Is there a guide or a simple way to remvoe the Injector cover? I want to remove mine to clean and tidy up the engine bay but I cannot find any information on how to remove it. Does any one have a photo guide or something? Thanks

Seeing as the weather today has been rather nice. I thought I would test the Air con in the car but I find that it does not work. Now I have the thoughts of either it needs re-gassing or it has been removed. Is there an easy test to see if the a/c has been removed?

My instrument panle is looking a little bit tired so I am thinking about getting a replacement, my question is will the mileage still read the same or will it reflect what has been done on the doner dash?

To remove the insert from the Gaer Knob I take it yo just pry it out with something and it pushes back in?

Seeing as the weather was looking good today I went for the first proper clean of the year today. I started with a two bucket wash and dry, followed with a full clay treatment and a rub down with some wax. It has not turned out too bad ut has highlighted some areas that need some attention...

One of the covers on my 182 mirrors has some nasty marks and scrapes on it so I thought i would remove it and get it resprayed, but I cannot find out how to remove the cover. Does anyone have a guide?

I am sure I am going to regret asking this but I cannot work it out. Do I have Xenons in my 182 Cup? I cannot find balasts etc but could be looking in the wrong place. There must be a quick way to find out. Thanks

I thought I would post about the RSTuner kit I recently purchased to help any others who are thinking of buying one. Firstly it does exactly what it says it will do on the website, I was able to view the fault codes on the car and reset the ones that I had fixed. I was able to backup the ECU...