Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Very good in the wet, people were actually coming to look what tyres I was using as I driving around them in the wet at Cadwell.
I've got some Dunlop Direzzas for the dry.
Aye, it'll be interesting to see how it differs in handling swapping the different sizes front to rear.
I read it may cause the abs to go a little crazy, I guess a fuse removal may remedy this if it does cause me issues.
I've got myself a set of Dunlop DZ03G track tyres which are all 195/55R15, two which are brand new, two which are past their best.
It seems that the 195/55's are no longer available and I'm limited to a choice of 195/50, 205/50 or 215/50.
Which would be best to pair up with the 195/55's? I've...
Locking the rear wheels won't be helping!
Surprisingly, I remember reading that in a certain scenario more brake bias to the rear prevents them locking.
That was my original idea, I think I have found a new switch here http://uk.rs-online.com/web/p/products/102399/
To replace the whole board seems much less hassle as my soldering skills are not brilliant. I found one for not much money here...
Hello
I have a small problem with my key, the button stopped working. I opened it up and the tactile swtich has snapped off the board.
I was wondering, if I was to buy a "virgin" key from ebay, could it be reprogrammed using the central door locking button resync method below?
Cheers
Phil...
I managed to get mine off with a chisel.
As a note, initially I was using a wood chisel for quite some time, two hits with a cold chisel and it budged it no problems.
User error is highly likely!!
I've recently put new mounts at the back, but will check and probably replace the rest.
I am pretty sure the K-tec part isn't genuine. What a waste of 25 quid.
Cheers and thanks for the advice.
I've been trawling the internet for hours and I am struggling to find what I am after.
I recently changed my cat to manifold fitting kit, but it is still blowing. It was a K-tec kit so assume quality won't be an issue.
I guess there is an issue with either the manifold or cat.
Because I'm...
Thanks Dablk
I spoke to K-Tec and there is no special fitting kit from the CAT to center exhaust section.
I'm going to take another look in my lunch hour as to where it is blowing from. I guess if it is from where I think it is probably the CAT blowing.
Phil
BTTT.
I messaged West Renault but didn't hear back, I suspect I am being a bit of a numpty. I've never done any work fitting an exhaust before.
Can someone confirm if this cat to manifold kit is also for the cat to center section pipe?
Cheers
Phil
Thanks Scooby
I think the exhaust is a cat back one, and appears to be blowing where the cat joins to the exhaust.
It surprises me the kit is for the other side of the cat.
Hello all
I purchased at 182 a few months back with a newly fitted K-Tec sports exhaust, apparently one with an additional silencer in the center section.
Anyway, it was blowing slightly which I assumed was from a bad fitment and a load of exhaust putty being used.
I went to have it sealed for...
I picked up a bluetooth one from ebay for about 8 quid. Sucessfully read errors on my 182, a puma and a corsa.
Only works with android though
http://www.ebay.co.uk/bhp/bluetooth-fault-code-reader
Hello all
I am after some touch up paint for my Black Gold 182, but it seems that Renault no longer supply or stock it.
Can anyone recommend where i might get some from?
I found this on ebay...
A bit of a thread resurection, but the link seems to be dead.
My newly purchased 182 with the trophey recaros, I think requires some four point harnesses!
Which are the fittings I need? I cannot seem to find them http://www.msar.co.uk/motorsport/Race-Harnesses/
Cheers
Phil