172 rally car build help aux belt set up and cam belt set up

[paul321wales]

i want to remove my air con and pas pump does anyone have pics of the correct routing for the belt amd pulley set up?
i have the cup bracket for the top of the altainator only

also stripped the cam belt down as there was a oil leak from the cam seal but it seems the cam belt has been lightly fouling the block/head should there be any spacers behind the tensioner and idler pulleys? they dont foul when turned,

 

[paul321wales]

Any help will be much appreciated guys

 

[Dan@SJM]

Aux belt will only go 1 way.

There is a spacer behind both idlers.

 

[Mini182]

The aux belt will go like this if you have the cup setup but remove the pas. That's how mine goes on the race car.

 

[paul321wales]

Spot on that mate, I don't have that bottom bracket what is that off mate?

 

[Dan@SJM]

Cup setup

 

[Mini182]

Yep as above it was off a 172 cup.

 

[paul321wales]

Thanks guys I better get shopping then lol

 

[filip360]

The aux belt will go like this if you have the cup setup but remove the pas. That's how mine goes on the race car.

which belt is?
thx

 

[bloke]

which belt is?
thx

4pk838 will do.

 

[Pauleds]

I used a 5pk 848