182 Alpine HU lead ?

[tc3nitro]

I have just bought a 182FF and am wanting to buy an Alpine stereo.
I am wanting to know where you car get the leads so i can use the HU with the steering controls and the display in the centre.

I really fancy a Alpine iDA-X100 not sure if this will work with both ?

Any advise or recommendations would be good.

Thanks in advance
Mark

 

[brownale01]

halfords sell them, do you have the cd autochanger as well mate?

 

[msa197]

http://cgi.ebay.co.uk/RENAULT-CLIO-STALK-ADAPTOR-INTERFACE-LEAD-PC99-X12_W0QQitemZ270329423625QQcmdZViewItemQQptZUK_Cars_Parts_Vehicles_Terminals_Cabling_ET?hash=item270329423625&_trksid=p3286.c0.m14&_trkparms=66%3A2%7C65%3A1%7C39%3A1%7C240%3A1318

You will have to remove the dash to fit this..

Or this one IIRC correclty just fits into the back of the radio ISO leads.
http://cgi.ebay.co.uk/RENAULT-CLIO-...3286.c0.m14&_trkparms=66:2|65:1|39:1|240:1318

 

[ginna]

if you fit those the dash upper display won't work though you need the correct one's to do it and also the stereo needs to be display ready which i expect the ida x100 to be.

these are what you need !!

 

[rosskerr]

if you dont want the dash display halfords do a autoleads kit for 30 of your finest pounds

 

[Jamie]

Good info, I have an Alpine CD player but not sure if its display ready. How can I tell?

 

[ginna]

put the model number in on google look at the spec and it should say in there and i think from 2004 on wards alpine made it standard but don't hold me to that !!

 

[MT AUDIO]

if you dont want the dash display halfords do a autoleads kit for 30 of your finest pounds

35 from halfords mate

alpine only for display aswell but they are a bit more pricey,if you just want stalks only then the cost is much cheaper

 

[Morphius]

I had a 1.4 Clio on an 05 plate. I had an alpine head unit 9883r working with both controls and screen, wasnt cheap but didnt need the dash taking apart either.

I had the normal ISO convertor, then another power lead pass through to power a small box which the screen and controls connector plugged into.

Worked like a dream but hard to hide all of those wires!

If you get really stuck I can see if i can find the part code on the box, but not sure if it is listed!

Morphius

EDIT

Part number on it is APF-D102RE ALPINE, it was installed by a company so not sure if that means anything, or what make this little box is, doesnt look like geniune Alpine, but worked!

 

[tc3nitro]

thanks for all the help.

I would really like the display to work as i hate it when you have a display that looks idle!

PM sent Ginna

Mark

 

[renclio182]

i have the leads for the 182 for both the stalk and the display £25 posted if you want

 

[tc3nitro]

The alpine ones ?

 

[renclio182]

yeh i had an alpine head unit in my old 182 and i still have the leads left over.