ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

182 Owners...



As stupid as it sounds I need a favour doing as I don't know anyone with a 182..

Getting a custom made rep exhaust. However im rocking a 172 rear bumper so if I cant get ahold of a black 182 bumper by the 30th.. well its guessing time for the fabricator.

All you need is a spare 5 mins of your time and a tape measure (;
Im wanting to know where the cut outs start from the outer edge then the length from the inner edges if you know wtf im on about because I think ive just confused myself by saying that.
Inches/cm/mms whatever you can give.
All I know is that he's putting 3" pipes on if that helps.

(-------O-----O-------)
^??CM ^??CM?
 
  Fiesta ST2 MP215
Have you looked properly? there are toms of 182's breaking out there, you'll also need the tail pipe trims first otherwise will look proper Gippo imo

Have you also got another Hanger in place for the 2nd tailpipe, 182's have 2. also are the holes for one even there / clean threads for the hanger.
 
  FF Clio 182
I have 2 brand new unopened hangers you want them? £15 posted? I would recommend getting new ones as I found out 182 exhausts eat them up quickly.
 
  Fiesta ST2 MP215
Also this depends if he is making the EXACT same exhaust from a 182 dimensions, which I doubt as wheel well in the way, then might make measuring the bumper worthless, surely the person making this can cut the bumper to fit? or is this a bodge job?
 

Sam

North East
ClioSport Area Rep
Get the exhaust made and then get your 172 bumper kit to suit.

You wont be able to tell the difference unless there stupidly close together.
 

Pat 182

ClioSport Club Member
  cliosport 182
Hello mate, im in Derby if you are close you can nip over and measure what you need to know?!

Cheers Pat
 
Going to a proper fabricator in my local city. Guys been doing exhausts for years, well skilled, known and highly recommended.

He looked at the car and questioned how I would want it seeming the wheel well is there. Shown him the one Ktec have done on their site and he agreed that he could do the whole thing from cat back for 285.
Im pretty sure but cant 100% remember but he said ill need another exhaust mount (obviously). but im not 100% on whether he said he could supply one. I'll have to ring him up and check!

Cars booked in for the 30th of this month.
Budget is tight and all 182 rears are going for 100+ not incl postage on the bay. Even though I got my 172 one for 50quid posted.
So the chances are slim of getting a 182 rear.. Hence why im now on here with my slight OCD of wanting proper measurements! I think he knows what he's doing with the cut outs, show him a few 182s and get the right idea. But the closer I can get to the actual measurements the happier ill be.

As for the trims, im pretty sure I can get a pair from on here.. Whether they will fit is another story. Cross that bridge when I get to it.
 
  Clio 197
Right here are the measurements - I have used the black bumper strip as the reference for the beginning and end of measurements.

I will let the brilliant picture do the talking :)

ahytybes.jpg
 
Right here are the measurements - I have used the black bumper strip as the reference for the beginning and end of measurements.

I will let the brilliant picture do the talking :)

ahytybes.jpg


Perfect mate!
+10000
Loving it haha! will take this to the dude when the date comes.
Nice one!
Lovely CS Community aha
 


Top