182 wheel spacers

[Gary Pease]

Hi guys I'm thinking of getting some wheel spacers for my 182 but am wondering which size to fit front and rear some advice would be great cheers

 

[imprezaworks]

Lowered or standard?

What wheels have you got

 

[Gary Pease]

Lowered on h&r springs with cup shocks and standard 182 wheels

 

[imprezaworks]

Are you looking at keeping the wheels? I'd personally go with a different offset (lower than current) wheels so you dont need spacers imo.

But if you are decided on wanting spacers, 16mm front, 10 ish rear.

 

[Gary Pease]

Don't really have the coin for a new set of alloys but if I did what offset would remove the need for the spacers?

 

[imprezaworks]

38 and below. I run 35's and it sits well.

 

[Gary Pease]

What's the standard offset?

 

[STEVE.M]

Lowered on h&r springs with cup shocks and standard 182 wheels

An interesting combination of 182 Cup shocks (the ones with 60mm bottom bolt hole spacing ), & hubs with 84mm o/d,40mm i/d & 38mm width bearings to match the 60mm shocks, along with 43.5mm offset rims from a standard spec 182.

 

[STEVE.M]

What's the standard offset?

Pray to me aaaaand I`ll give you all the answers.:smile:

 

[imprezaworks]

What's the standard offset?

45/48 iirc

 

[STEVE.M]

45/48 iirc

I have total recall.

 

[Gary Pease]

I don't have a cup so ive put 172 cup front shocks

 

[STEVE.M]

I don't have a cup so ive put 172 cup front shocks[/QUOTE
You`ve got me there.
I need to look into if a stanard 182 had 172 Cup springs & shocks, but if so, how did they cope with the extra weight?

 

[leeds2592]

Ta dah

http://www.cliosport.net/threads/spacers-guide-info.802113/

 

[Gary Pease]

Extra weight? Is a phase 2 182 heavier than a phase 2 172? Put the 172 cup shocks on cos they had the correct hub bolt spacings

 

[STEVE.M]

Extra weight? Is a phase 2 182 heavier than a phase 2 172? Put the 172 cup shocks on cos they had the correct hub bolt spacings

172 CUPS are around 80kg lighter than other variants purportedly.
See here from 15 years ago.
http://www.cliosport.net/threads/official-172-cup-weight.84193/

No PH2 variants actually shared front shocks or springs.
As I have no actual technical specs, I would not wish to speculate if the 172 CUP front shocks 8200681108 are a preferable fitment to original 182`s 8200681119 on a 182.
Realistically, anything new is going to be better than tired out old kit with 90k miles on it.

Front Shocks Front Springs Rear Shocks Rear Springs Kerb Weight
Ph2 172 8200681106 x2 54mm 7700817986 x2 white dots 8200662257 7700436850 1120 kgs ?
Ph2 172 CUP 8200681108 x2 54mm 8200257954 x2 white & yellow dots 8200681125 7700436850 1020 kgs ?
Ph2 182 8200681119 x2 54mm 8200342859 x2 blue & green dots 8200681128 7700436850 1100 kgs ?
Ph2 182 CUP 8200681109 x2 60mm 8200342860 x2 blue & yellow dots 8200681125 7700436850 1100 kgs?

 

[Gary Pease]

All that lot has gone straight over my head! Although I'm not using standard springs I'm using h&r springs does that make a difference

 

[imprezaworks]

Be fine mate.