2118 centre cap file???

[Advikaz]

Hi,

Mate of mine is a 3D printing specialist, has anyone got any tried and proven files they wouldn’t mind sharing ?

Thanks in advance,

 

[Robbie Corbett]

Hi,

Mate of mine is a 3D printing specialist, has anyone got any tried and proven files they wouldn’t mind sharing ?

Thanks in advance,

@Louis might be your man

 

[Advikaz]

@Louis might be your man

If all good. My pal may be able to get the old production line started again

 

[JamesBryan]

@Louis test printed me some years ago and they were shite.

HTH

😂

 

[Krarl]

Ruthless

 

[JamesBryan]

I think he made the file better since then.

 

[Robbie Corbett]

 

[Louis]

Brutal.

The first ones had no support and tried to rely on the clip flexibility to stay in but it didn't work.

The next ones were strengthened and worked fine.

James doesn't mention they were free test parts 👁👄👁

 

[JamesBryan]

Brutal.

The first ones had no support and tried to rely on the clip flexibility to stay in but it didn't work.

The next ones were strengthened and worked fine.

James doesn't mention they were free test parts 👁👄👁

You know i was joking 😘

I think the material was a bit thin or something from memory?

 

[Advikaz]

Brutal.

The first ones had no support and tried to rely on the clip flexibility to stay in but it didn't work.

The next ones were strengthened and worked fine.

James doesn't mention they were free test parts 👁👄👁

The hole is really starting to irritate me 😂

Any help would be greatly appreciated.

 

[Mr Underhill]

I'm sure @Jekyll made some. Not sure f he has a file though.

Speedline 2118 centre caps

Made some center caps for my 2118s using some "Renault" caps off ebay and some 60mm x 2mm perspex tube. I measured the gap between the hub lip and the edge of the wheel, which is 9.5mm. I aroldited the rear of the caps in rings once the tube was cut at 9mm (wanted a little gap) Filled and...

cliosport.net

 

[Jekyll]

Unfortunately not. I just cut a tube up into 5mm or 6mm rings (can't remember the exact size) and glued in some cheap ebay caps. It was more of a DIY job.

I think making caps for these has been going on since speedline realised the wheel 😆

 

[Jekyll]

*released

 

[Brigsy]

Stick a set of cheapo universal centre caps in, stops the hub nuts rusting. Nightmare to match the spwedline anthracite however, had 2 attempts and give up😆

 

[Clio_fool]

Buy some better looking wheels. Problem solved.

 

[bren172]

These are mine