ABS Removal

[AdamCup]

Hey all,
I'm looking to remove the ABS from my 05 182 Cup track car, is it just a case of removing the ABS pump and re-plumbing it all ?
Cheers,
Adam

 

[JB21]

You'll either need the 172 cup set-up (master, lines, bias valve etc...) or custom hard lines making up from your master with bias valve. There's also a kit on eBay made up of all braded lines for around £200...

http://www.ebay.co.uk/itm/Renault-C...157692?hash=item41a847e2fc:g:YIgAAOSwoudW3Cl-

 

[Ph1 Tom]

I used a kangoo dci cylinder (same as the cup) and Mondeo non abs rear pressure reducers. Two new copper brake lines for the front and two pipes to join onto the existing rear lines that run from the bulkhead. Cost me about £50

 

[cs_dave]

I would love to swap all my hard lines for braided items tbh.

 

[ashley_t]

I used a kangoo dci cylinder (same as the cup) and Mondeo non abs rear pressure reducers. Two new copper brake lines for the front and two pipes to join onto the existing rear lines that run from the bulkhead. Cost me about £50

How did you find this setup @Ph1 Tom ?

Any mot issues?

 

[Jamie86]

I would love to swap all my hard lines for braided items tbh.

This is what I have in the ph1 with a tilton valve for the rears. Takes a lot to get used too but brakes seem spot on