Aftermarket steering wheel and cruise-something different!

[Detail Chris]

Just a quick mention to show I've got the radio control stalk to operate cruise! I wanted cruise with my sabelt wheel but didnt want any shitty buttons on display, and as the radio stalk was not in use I thought why not.

So I made a small circuit board up with the required resistors, wired it all together and bingo it's working.

Chris
DetailMe

 

[George182]

That's fantastic! More details please!

 

[goldy...]

nice one, just need someone to put up a guide on how to retrofit for clios without cruise controll......

 

[benn j]

This is great ... As above more details please

 

[Austin-182]

Stop teasing and put up a full guide with loads of pictures please!

Austin.

 

[danward]

That's pretty impressive! Fair play.

 

[JHead]

nice one, just need someone to put up a guide on how to retrofit for clios without cruise controll......

This ^

 

[Detail Chris]

Haha ok ill try and sort a little paint shop diagram or something. It's easy but you need to understand basic electronics and continuity testing etc.

Cruise Worked like a dream tonight!


Chris
DetailMe

 

[koi]

Got skills

 

[Bert.C]

nice one, just need someone to put up a guide on how to retrofit for clios without cruise controll......

Even possible?...

 

[Feates172]

Yeah it is possible.

 

[Meek_racing]

http://www.cliosport.net/forum/show...rket-wheel-with-CC-buttons-Used&highlight=RMD

I did this some time ago, you just copy the resistors and wire route on the current cc button and heat shrink it all into place. No need for the small pcb plate as that's only for the button. I did have a diagram but could be anywhere

 

[Dave..]

Haha ok ill try and sort a little paint shop diagram or something. It's easy but you need to understand basic electronics and continuity testing etc.

Cruise Worked like a dream tonight!


Chris
DetailMe

If you're good at something, never do it for free

 

[JHead]

so how does it work atm..?? can you control the speed up and down with the volume buttons, or possibly the flick wheel on the back...?? :L is it even possible? :L

 

[Austin-182]

If someone could make these kits up, I'm sure they could make a quite a lot of ££££.

 

[MWright]

Pretty much the same idea - http://www.renaultforums.co.uk/showthread.php?t=107630

Good idea, still after a way of fully retrofitting to a non-RS

 

[Detail Chris]

Of course it works lol! So I have volume up an down as speed up and down and button underneath for resume etc.
The reason for the small pcb is to keep the little resistors a bit safe and neater. Just looked at that link and he soldered the resistors in line to the stalk which is a bit Poney.

You can't really make a kit up as I did think about it. I'll try and do a guide soon!

 

[James28]

What resistors did you use?

 

[JezzaMac]

Detail Chris is there any chance of getting a guide up? I know this is a bit of a bump but I don't want shitty buttons on my wheel I want to use the radio controls like you!