Aftermarket Steering Wheel help required

[Superwoman90]

Any help would be appreciated. I’m running Clio 182 Cup.
The mechanic who fitted my new aftermarket steering wheel discovered the car had 2 connectors for the air bag but could only fit one to new wheel therefore the airbag light comes on the dash.
Secondly there’s a fault with the steering angle sensor and traction control light.
Has anyone any idea how to rectify these faults or get around them?

 

[Clio_fool]

What sort of wheel did you have fitted? Sounds like they made a right balls of it.

 

[Superwoman90]

What sort of wheel did you have fitted? Sounds like they made a right balls of it.
[/QUOTE]
OMP TRECENTO UNO from YB Racing on EBay.

 

[Clio_fool]

So as it has no airbag there's nothing to connect either airbag wire to, and yes the airbag light will be on. Two options, either find someone with an RS Tuner unit or Renault Clip software who will be able to disable the airbag in your ecu which will turn off the warning light or buy a couple of 3.3 resistors and plug them into the airbag plugs. Resistors are a bit hit n miss.
The steering angle sensor can be reset but I don't know how, do a search on here as I'm sure it's been discussed before.

 

[Superwoman90]

So as it has no airbag there's nothing to connect either airbag wire to, and yes the airbag light will be on. Two options, either find someone with an RS Tuner unit or Renault Clip software who will be able to disable the airbag in your ecu which will turn off the warning light or buy a couple of 3.3 resistors and plug them into the airbag plugs. Resistors are a bit hit n miss.
The steering angle sensor can be reset but I don't know how, do a search on here as I'm sure it's been discussed before.

Appreciate your advice.👍