Airbag help

[bowen86]

Yes, another airbag light "help" request.

Right then, recently I bought an RS tuner with airbag module. I was able to turn off all the airbag lights/sensors but when I went over bumps/turned the wheel the light would come back on. Over another bump and off and repeat.

I plugged in the RS tuner whilst the light was on and had this;

Interestingly when I enable all airbags the "ignition trigger" isn't there:

More info:

Clio 182 with after market seats and wheel.

The passenger seat isn't plugged in and has no resistors.

The drivers seat the wires are just cut. No plugs, just wires taped up in electrical tape. No resistors.

Steering wheel has resistors in these plugs.

They are usually taped up.

So with that in mind. Anyone able to help?

Thanks.

 

[Louis]

If you're removing airbags on rstuner then remove the resistors first

 

[hopgop1]

Did you definitely lock and then unlock when reconfiguring the airbags? I had some weird codes when I forgot to do that.

 

[bowen86]

Thanks both.

@Louis good info in the resistors will remove and try again.

@hopgop1 I think so. I mean, I've had a beer....so maybe. No I definitely did.