ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Ar-1 pressure



Philip Griffiths

ClioSport Club Member
  182 cup
High. Just wondering what cold pressures people are running in their 1*2.

The cars totally stripped out, full cage etc just as a gauge of weight.

Thanks


Sent from my iPhone using Tapatalk
 

Daniel

ClioSport Moderator
  Whichever has fuel
Do a 1-2 warm up laps, then 2-3 fast laps, come in and check pressures. You want about 28-30psi hot.

My MRF’s are about 23/24 cold and ideally 28/29 hot. Slightly higher on the rear but that’s my personal preference.
 

Philip Griffiths

ClioSport Club Member
  182 cup
Do a 1-2 warm up laps, then 2-3 fast laps, come in and check pressures. You want about 28-30psi hot.

My MRF’s are about 23/24 cold and ideally 28/29 hot. Slightly higher on the rear but that’s my personal preference.

I ran them in Combe last weeks and got they were 25-26psi but found they were starting to wear the centres.


Sent from my iPhone using Tapatalk
 

JamesBryan

ClioSport Club Member
  Titanium 182
I usually start at 25psi and then bleed them off a few times until they stay consistently at 28psi hot.
 

Breamy

ClioSport Club Member
I've found my ar1s to wear the centers on the front too. Even trying lower pressures
 


Top