Bit bored today so.......

Matt_S · Mar 5, 2007

I decided to paint my dash trim/inserts

Going to try my engine cover next,just got a question about preping it for those who have painted theirs. Did you sand it down so it was smooth or just cleaned any oil, grease and dirt off it then sprayed it?

philmots · Mar 5, 2007

Bet they'll look pretty good on the dash, thinking of doing mine tbh... Pics!

davejm123 · Mar 5, 2007

fitted piccys please! look nice though

chrisg3110 · Mar 5, 2007

looks good...get some pics of them on dash

Mikey · Mar 5, 2007

matt they look amazing, any pics dude?

Matt_S · Mar 5, 2007

Got a bit dark before they were fully dried, will get some pics tomorrow of them in the car.
Does any body know how much the steering wheel badge is from the 'stealers' as i think the silver one will look a little odd

Mikey · Mar 5, 2007

erm... what you mean a black v6 one?

Peperami · Mar 5, 2007

philmots said:
Bet they'll look pretty good on the dash, thinking of doing mine tbh... Pics!

You've got a cup, they're already painted?!

philmots · Mar 5, 2007

Peperami said:
philmots said:

Bet they'll look pretty good on the dash, thinking of doing mine tbh... Pics!

Click to expand...

You've got a cup, they're already painted?!

a sh1t colour!

Matt_S · Mar 5, 2007

Peperami said:
philmots said:

Bet they'll look pretty good on the dash, thinking of doing mine tbh... Pics!

Click to expand...

You've got a cup, they're already painted?!

Aint got a cup mate.

Just a std one then I can spray it my self, just one problem tho getting another sticker same as the air bag thats gone with the spraying

philmots · Mar 5, 2007

^ you on about the renaultsport sticker on the steering wheel?

Was just thinking the same, hmmmmmm

Matt_S · Mar 5, 2007

philmots said:
^ you on about the renaultsport sticker on the steering wheel?

Was just thinking the same, hmmmmmm

Yeah thats the one think it will look a bit plain with out it.
seen some stickers on e-bay but there bout 6inch across (bit big me thinks

)

Mikey · Mar 5, 2007

im sure middo might be able to work some magic and get some, he did airbag ones a while back.

Matt_S · Mar 5, 2007

M!keydee said:
im sure middo might be able to work some magic and get some, he did airbag ones a while back.

Don't you think it's a bit cheeky for me to ask him as I don't really know him or him know me?

Mikey · Mar 5, 2007

lol yeh true, could do a thread in clio discussion and hope he replies lol....

philmots · Mar 5, 2007

Matt_S said:
M!keydee said:

im sure middo might be able to work some magic and get some, he did airbag ones a while back.

Click to expand...

Don't you think it's a bit cheeky for me to ask him as I don't really know him or him know me?

not if you throw a few quid his way if he can do one

Middo · Mar 5, 2007

i just went down to my local sticker place, but seeing as i need to go down next week to get some stickers made up for an engine cover i'll ask about getting some airbag stickers as i know some other people want them as well.

thats you daz and andy if your reading this

Matt_S · Mar 6, 2007

^ I know this sounds really really cheeky is there any chance you could send me an airbag sticker and one for the engine cover coz I'm planning to paint that as well and I'll send some cash your way chap? What are the chances of them doing the Renaultsport sticker for the steering wheel bit?

With regards to engine covers when you paint yours do you sand it down to a smooth finish then paint or just clean it up?

Matt_S · Mar 6, 2007

As asked here are a couple of in car picks of my new dash work

DH_GTI · Mar 6, 2007

look good

Bluebeard · Mar 6, 2007

was that with Rattle cans?? looks bloody brilliant if it was!!

Rich · Mar 6, 2007

I like it. I think they should have all come as standard with the inserts body coloured.

makavelli · Mar 6, 2007

Middo said:
i just went down to my local sticker place, but seeing as i need to go down next week to get some stickers made up for an engine cover i'll ask about getting some airbag stickers as i know some other people want them as well.

thats you daz and andy if your reading this

BREMBO · Mar 6, 2007

Reminds me of the inside of a V6MkII in that bronze/brown colour... i like

Matt_S · Mar 6, 2007

superfastdan said:
was that with Rattle cans?? looks bloody brilliant if it was!!

Cheers, yeah with the 'Renault Black' from halfords, not that bad a match either was expecting it to be miles of the colour. I've not put any lacquer on either was glossy enough with just the base colour but will see how it last can always put a clear coat on top

Adam · Mar 6, 2007

very nice mate.
im getting board of my green ones now lol

bendee · Mar 6, 2007

can you put the v6 center bit in that goes around the gear stickand up towards the center colum because that would look quility or do they not fit the 182/172s

BREMBO · Mar 6, 2007

Doubt they would fit into the 182/172's. Would be difficuilt i think unless it was custom made.

S Garbett · Mar 7, 2007

Matt_S said:
superfastdan said:

was that with Rattle cans?? looks bloody brilliant if it was!!

Click to expand...

Cheers, yeah with the 'Renault Black' from halfords, not that bad a match either was expecting it to be miles of the colour. I've not put any lacquer on either was glossy enough with just the base colour but will see how it last can always put a clear coat on top

They look smart mate, but dont think the coloured black goes well with the dash IMO

You need the laquer on mate. It will be soft with out it and 1 bang on it with your keys and it will chip!

I did mine myself too

Steve

Matt_S · Mar 7, 2007

S Garbett said:
They look smart mate, but dont think the coloured black goes well with the dash IMO

You need the laquer on mate. It will be soft with out it and 1 bang on it with your keys and it will chip!

Cheers mate just got fed up with the silver looking a bit plain thats all. Got spare ones incase i messed things up may now spray them a diff colour was thinking about hologram grey or trying to get a petrol blue kind of colour n see what that would look like.

Doing my door badges again as well here as some photo's are half way through, letters are done in hologram grey just need final sanding then top coat on

Mikey · Mar 7, 2007

they look mint matt dude, good job!

Christopher · Mar 7, 2007

loving the white dash inserts!

Mikey · Mar 7, 2007

carbon copy said:
loving the white dash inserts!

do yours racing blue

S Garbett · Mar 7, 2007

carbon copy said:
loving the white dash inserts!

Thanks kind sir!

Christopher · Mar 7, 2007

M!keydee said:
carbon copy said:

loving the white dash inserts!

Click to expand...

do yours racing blue

already on the case fella.

S Garbett said:
carbon copy said:

loving the white dash inserts!

Click to expand...

Thanks kind sir!

what did you use for them? rattle cans?

where do you think will sell racing blue rattle can if so?

S Garbett · Mar 7, 2007

Yeah i used rattle cans. I would go to a paint campany and get them to make it up for you mate, halfords dont do nice colours in rattle can

I cant remember the one middo uses, but they make it up for you and send it you in a rattle can. quite cheep tbh and the colour match will be spot on.

I did these processes: Acid primer, Normal Primer, Colour, Laquer.

I didnt my side badges, renault diamonds aswell. I am sure most of you have seen them because i am a pic *****!

Steve

Matt_S · Mar 7, 2007

carbon copy said:
what did you use for them? rattle cans?

where do you think will sell racing blue rattle can if so?

I went to a local motor factors to get the paint mixed for my door badges and used halfords for my dash inserts.

Door badges look a bit of a miss match paint wise, at the mo but when they are wet being sanded the gold flake comes to the front

Christopher · Mar 7, 2007

lol

cheers steve

i'll send marko a PM.

S Garbett · Mar 7, 2007

carbon copy said:
lol

cheers steve

i'll send marko a PM.

No Worries Mate

Steve

Bit bored today so.......

Similar threads