bogging when cold

[ditz]

got a slight issue with the 182 lump..
when its not up to full operating temperature, if you snap the throttle open it bogs down and will then pick up, will do this everytime you snap the throttle untill its up to full operating temp

i know you dont need to be flooring it from cold before anyone says it, but i want it running right

only fault codes listed are carbon canister but thats not there.

im thinking plugs, as they looked quite old and manky and didnt have the pennies for a new set, gonna try and get some tommorow but anyone had similar faults?


cheers

 

[mini-valver]

TB need cleaning? CTS on it's way out?

 

[ditz]

throttle bodys clean, temp sensor i suppose is a possibilty but it seems to be working ok
on live data the temp increases so all seems well
just weird how its perfect once hot
i've only got the lambda before the cat plugged in too, doubt this would affect it?

 

[mattjk]

Mines still connected but not in the exhaust its just for eimmsions rather than running.

 

[Laura]

they all do it to some degree

 

[ditz]

its quite bad thought ie floor it and you get no power at all almost like you switch the ignition off for a second then it will missfire and pick up like normal

 

[mini-valver]

MAP sensor leak? Mine split and did similar but it wasnt temperature dependant.....

 

[ditz]

its not the map sensor but you have got me thinking
an airleak could give those sort of symptoms i suppose, i have a feeling i may have trapped a plug lead under the plenham im wondering if its not sitting down completely square

will check that when i do the plugs

 

[mini-valver]

Inlet manifold leak would make it idle really high though...... Unless its hairline I guess??